Parts

Product Information

Model number: 22324
Serial number: 401800000 - 404499999
Product Type: Compact Utility Loaders

No.	Description

Assembly Drawings

Search for a part within assembly drawings:

Showing Results

Drawing Title	Part Number	Description
Title

Air Cleaner Assembly No. 93-2190

Alternator Components Assembly

Alternator, Pulley and Fan Assembly

Auxiliary Hydraulic Assembly

Camshaft and Idle Gear Shaft Assembly

Control Handle and Reference Bar Assembly

Control Panel Assembly

Crankcase Assembly

Cylinder Head Assembly

Cylinder Head Cover Assembly

Dipstick and Guide Assembly

Drive Assembly

Electrical Assembly

Engine, Muffler and Air Cleaner Assembly

Fuel Camshaft Assembly

Fuel Gauge, Hour Meter and Ignition Assembly

Fuel Tank, Fuel Pump and Filter Assembly

Gear Case and Oil Filter Cartridge Assembly

Governor Assembly

Grill Assembly

Hood Assembly

Hydraulic Cylinder Assembly No. 117-1833

Hydraulic Motor Assembly No. 114-1756

Hydraulic Pump and Filter Assembly

Hydraulic Pump Assembly No. 106-9589

Hydraulic Pump Assembly No. 106-9590 and 106-9591

Idle Apparatus and Fuel Pump Cover Assembly

Injection Pump Assembly

Inlet and Exhaust Manifold Assembly

Left Hand Hydraulic Lift Cylinder Assembly No. 117-1831

Loader Arm Assembly

Loader Arm Hydraulic Assembly

Lower Engine Gasket Kit

Main Bearing Case Assembly

Main Frame and Fuel Tank Assembly

Miscellaneous Engine Parts

Nozzle Holder and Glow Plug Assembly

Nozzle Holder Assembly

Oil Pan and Oil Pump Assembly

One Spool Valve Assembly No. 104-2831

Parking Brake Assembly

Piston and Crankshaft Assembly

Principal Hydraulic Assembly

Radiator and Oil Cooler Assembly

Rear Access Cover Assembly

Right Hand Hydraulic Lift Cylinder Assembly No. 117-1832

Starter and Flywheel Assembly

Starter Component Assembly

Stop Solenoid and Speed Control Plate Assembly

Track and Traction Assembly

Traction Control Assembly

Traction Hydraulic Assembly

Two Spool Valve Assembly No. 106-9307

Upper Engine Gasket Kit

Valve and Rocker Arm Assembly

Water Flange and Thermostat Assembly

Water Pump and Water Pipe Assembly

Download Parts Catalogue

Use this standard bucket for moving rock, dirt, sand or other materials off and around the job site. The hardened steel cutting edge offers improved cutting and digging capability for better performance to handle tough digging conditions and affords superior wear. Capacity = 1 m³ (4 cubic feet)

Light Materials Loader Bucket Attachment (Part number 22410)

Designed for moving light materials like chip-bark, mulch, snow and loam. The larger capacity bucket, 0.2 m³, is great for handling larger loads of lighter materials. The hardened steel cutting edge allows for improved cutting and digging capability for better performance to handle tough digging conditions and affords superior wear.

Utility Blade Attachment (Part number 22414)

The Toro Dingo hydraulic blade greatly increases the versatility of your Dingo system. This incredibly versatile attachment can be used for a variety of earth or snow moving jobs. Fill trenches where rows of trees have been planted or irrigation pipes have been installed. Keep your hydraulic blade working in the winter by pushing snow from pavements in one pass.

Rotary Broom, Dingo (Part number 22415)

Bore Drive Head Attachment (Part number 22420)

The Toro® Dingo® boring unit allows you to dig under pavements and driveways to simplify irrigation and cable installations. Shorter rod lengths and the ability to lower the bore head below grade allow you to work in both confined and open areas, increasing your productivity.

Rod and Reamer Kit (Part number 22421)

Easily bore under driveways and pavements to simplify irrigation and cable installations. Use with Bore Drive Head attachment model 22420. Working depth: 48 cm. Bits and reamers up to 8.9 cm (3.5") in diameter.

Multi-Purpose Tool, Dingo (Part number 22423)

Power Box Rake Attachment (Part number 22426)

The Toro Power Box Rake is the perfect tool for seed bed and sod bed preparation. The rotary drum on the power box rake pulverizes rough soil, cuts high spots and fills low spots in one pass; while removing rocks and debris. Pure carbide teeth design produces the best possible seeded sub-soil, which promote superior moisture retention and rapid seed growth.

Stump Grinder Attachment (Part number 22429)

The Toro® Dingo® Stump Grinder easily attaches to either Dingo or Dingo TX compact utility loaders. Make grinding stumps quicker and more productive with the stump grinder attachment for your Toro Dingo.

Tree Fork Attachment (Part number 22438)

The Toro Dingo hydraulic tree forks can help you plant trees and large shrubs quickly and effortlessly, plus move all sorts of materials around your garden center or nursery. The Dingo Compact Utility Loader is especially easy to manoeuvre, helping you transport and position trees or shrubs exactly where you want them.

Cement Mixer Attachment (Part number 22442)

This unique attachment will mix and pour up to 200 pounds (90.7 kg) of dry cement. The specially designed auger flighting inside the cement bowl keeps the cement in the bowl during mixing. This same auger design permits cement to be poured into fence post holes with the posts in place!

Tiller Attachment (Part number 22445)

The Toro Dingo tiller attachment greatly increases the productivity and performance of your Dingo system. Break through hard soil conditions up to 15 cm (6") deep. Avoid clogging the tiller by using one easy hand control to reverse the direction of the tiller to clear jams from rocks and debris.

Snowthrower, Dingo and Dingo TX (Part number 22456)

Trencher Crumber (Part number 22464)

Spring design, trencher accessory to help clean out trenches

Trench Filler, Compact Utility Loader (Part number 22472)

High Torque Trencher Attachment (Part number 22473)

High-torque trencher head with heavy-duty drive system guarantees performance in the toughest soil conditions from rock to caliche. Dig trenches up to 127cm below grade. Heavy-duty nose roller bearing and reversible abrasion-resistant boom give you years of dependable use.

High Speed Trencher Attachment (Part number 22474)

Ideal for fast, efficient trenching in most soil conditions. Great for cable, pipe or irrigation installations.

TX Platform, Diesel-Powered TX Compact Utility Loader (Part number 22476)

Trencher Crumber (Part number 22477)

Trencher accessory to help clean out trenches

24" x 4" Soil Chain (61 cm x 10.2 cm) (Part number 22480)

2-pitch chain w/4-pitch tooth spacing (24 station)

24" x 4" Combo Chain (61 cm x 10.2 cm) (Part number 22481)

2-pitch chain w/soil and rock teeth (24 station)

24" x 4" Rock Chain (61 cm x 10.2 cm) (Part number 22482)

Welded shark chain 100% rock tooth (24 station)

24" x 6" Soil Chain (61 cm x 15.2 cm) (Part number 22483)

2-pitch chain w/4-pitch tooth spacing (24 station)

24" x 6" Combo Chain (61 cm x 15.2 cm) (Part number 22484)

2-pitch chain w/soil and rock teeth (24 station)

24" x 6" Rock Chain (61 cm x 15.2 cm) (Part number 22485)

Welded shark chain 100% rock tooth (24 station)

36" x 4" Soil Chain (91.4 cm x 10.2 cm) (Part number 22486)

2-pitch chain w/4-pitch tooth spacing (32 station)

36" x 4" Combo Chain (91.4 cm x 10.2 cm) (Part number 22487)

2-pitch chain w/soil and rock teeth (32 station)

36in x 4in Rock Tooth Chain (Part number 22488)

36" x 6" Rock Chain (91.4 cm x 15.2 cm) (Part number 22489)

Welded shark chain 100% rock tooth (32 station)

36" x 6" Soil Chain (91.4 cm x 15.2 cm) (Part number 22490)

2-pitch chain w/4-pitch tooth spacing (32 station)

36" x 6" Combo Chain (91.4 cm x 15.2 cm) (Part number 22491)

2-pitch chain w/soil and rock teeth (32 station)

48" x 4" Soil Chain (122 cm x 10.2 cm) (Part number 22492)

4-pitch chain w/4-pitch tooth spacing (20 station)

48in x 4in Combination Chain (Part number 22493)

48" x 6" Soil Chain (122 cm x 15.2 cm) (Part number 22494)

4-pitch chain w/4-pitch tooth spacing (20 station)

48" x 6" Combo Chain (122 cm x 15.2 cm) (Part number 22495)

4-pitch chain w/soil and rock teeth (20 station)

Narrow Loader Bucket Attachment (Part number 22520)

Handle compact construction and remodelling sites by moving through 91.4cm gates without a problem. This 87.6cm wide bucket allows you to get through narrow spaces, including gates and doorways. Move rock, dirt, sand or other materials off and around the job site. Great for use on any Dingo® model equipped with narrow wheels and tyres.

Grapple Rake, Compact Utility Loaders (Part number 22521)

Standard Bucket with Spacer (Part number 22522)

FLOOR SCRAPER (Part number 22673)

High Torque Auger Attachment (Part number 22805)

In any drive head, there is a trade-off between torque (power) and speed (revolutions per minute). The high torque head provides a large amount of torque to the auger at a slower speed. The high torque translates into the Dingo's capability to dig 30" (76.2 cm) holes up to 6' (1.8 m) deep in clay, gravel, sandstone and many other conditions where lower torque heads get stuck.

Mini Skid Steer Auger Attachment (Part number 22806)

This attachment swivels in all directions to create plumb holes on uneven terrain. The higher speed of this auger power head is ideal for augers up to 24" (61cm) in diameter. Quickly change between auger bit sizes to dig holes for fence posts, footings, irrigation heads and more!

18" Auger Bit (Part number 22814)

18" Auger Bit, requires 22805 or 22806

24" Auger Bit (Part number 22815)

24" Auger Bit, requires 22805 or 22806

30" Auger Bit (Part number 22816)

30" Auger Bit, requires 22805 or 22806

12" Auger Extension (Part number 22818)

12" Auger Extension - add onto any auger to increase depth

24" Auger Extension (Part number 22819)

24" Auger Extension - add onto any auger to increase depth

6" Full Flight Auger Bit (Part number 22820)

6" Full Flight Auger Bit - requires 22805 or 22806

9" Full Flight Auger Bit (Part number 22821)

9" Full Flight Auger Bit - requires 22805 or 22806

12" Full Flight Auger Bit (Part number 22822)

12" Full Flight Auger Bit - requires 22805 or 22806

15" Full Flight Auger Bit (Part number 22823)

15" Full Flight Auger Bit - requires 22805 or 22806

Vibratory Plough Attachment (Part number 22911)

The Toro® Dingo® vibratory plow attachment greatly reduces a contractor's time spent on irrigation and cable installations. Exclusively designed and built by Toro specifically for use on the Dingo, the vibratory plow optimizes pipe-pulling performance while minimizing turf damage during an installation. Also, use the chuted blade and spool carrier to install wire or cable.

24" Boom (Part number 22975)

24" Boom

36" Boom (Part number 22976)

36" Boom

48" Boom (Part number 22977)

48" Boom

Soil Cultivator Attachment (Part number 23102)

The soil cultivator is the ultimate attachment for soil preparation! This incredibly versatile attachment can be used to cultivate and level soil as well as blend landscape materials, compost and fertiliser. This attachment will also bury debris such as stones, soil clods and grass. It transforms rough terrain into a perfect planting bed in one pass.

Concrete Breaker, Dingo Compact Utility Loaders (Part number 23135)

Backhoe Kit, Dingo TX (Part number 23162)

Backhoe, Dingo Compact Utility Loader (Part number 23163)

Adjustable Forks, Dingo Compact Utility Loader (Part number 23164)

Leveller Attachment (Part number 23165)

This versatile and highly productive tool is a must-have attachment for all job sites. Use to grade, finish, and spread landscape materials, backfill trenches, and break up the turf. Also great for carrying and transporting materials around the job site.

30IN STANDARD BUCKET (Part number 23174)

30IN PALLET FORK (Part number 23175)

30IN GRAPPLE (Part number 23176)

10W30 4-CYCLE ENGINE OIL 32 OZ BOTTLE (Part number 38280)

Spark Arrestor Screen (Part number 75-6880)

Product Details

Model number
22324
Serial number
401800000 - 404499999
Product Name
Dingo® TX 525 Track Loader, Wide
Product Brand
Toro
Product Type
Compact Utility Loaders
Engine/Motor Manufacturer
Kubota
Engine/Motor Size
25 hp
Engine Starter
Electric
Transmission Type
Hydrostatic

Dingo® TX 525 Track Loader, Wide