Dingo® TX 525 Track Loader, Wide

Model: 22324

See All Items in Dingo® TX 525 Track Loader

Find a Dealer

Patented TX control system
Liquid-Cooled Kubota diesel engine

Top

Overview

Our diesel Dingo® TX models deliver what customers want: extra torque, longer engine life, and increased hydraulic flow for enhanced performance of ground-engaging attachments. The TX 525 offers amazing hydraulic power, delivering 52.2 L/min and pumping 24 hp to the attachments, yet has a ground pressure as low as 3.4 psi. And because they’re part of the full-line family, these diesels are compatible with all of Toro’s compact utility loader attachments.

Features

Simple Controls

Three simple controls let operators get to work fast.

Dingo TX427 with the bucket hauling blocks of cement

4-Pump Hydraulic System

4-pump hydraulic system lets you simultaneously operate the loader, bucket, traction, and auxiliary drives for increased operator efficiency. This system directs hydraulic power precisely where you need it!

Dingo 525 in Florida using the trencher attachment near a sidewalk

Exclusive TX Track Drive

Low centre of gravity and large footprint increase stability on side hills and provide smooth operation over rugged terrain; eliminates tyre ruts and flat tyres.

TX525 with the trencher attachment trenching in black soil

Liquid-Cooled Diesel

The 23.3 hp (17.3 kW) Kubota diesel engines torque curve combined with the added auxiliary hp provide attachments the added power tough jobs require.

Specifications

Air Filter	Two-stage, Heavy-duty, Remote
Cooling System	Liquid Cooled
Dump Angle	38 deg
Dump Height	117 cm
Engine Discplacement	901 cc
Engine Horsepower	18.5 kW (24.8 hp) @ 3,200 rpm
Engine Make	Kubota
Engine Model	D902
Fuel Tank	22.7 litres
Fuel Type	Diesel
Ground Clearance	11.7 cm
Ground Pressure	23.4 kPa (3.4 psi)
Ground Speed - Forward	Up to 4.5 mph
Ground Speed - Reverse	Up to 2.0 mph / 3.2 km/h
Height	117 cm
Height - With Bucket	117 cm
Hinge Pin Height	167.1 cm
Hydraulic Flow - Auxiliary	52.2 L/min
Hydraulic Flow - Traction	64 L/min
Hydraulic Pressure	207 bar (3,000 psi)
Length	179.5 cm
Length - With Bucket	233.6 cm
Loader Arms	Radial
Max Operating Height	228.8 cm
Oil Capacity	3.6 litres
Rated Operating Capacity*	553 lbs / 250.8 kg
Reach - Fully Raised	55.3 cm
Reservoir Capacity	37.8 litres
Tip Capacity	694 kg
Track Length	245.3 cm
Track Width	24.1 cm
Tracks	Sprocket-drive, 10 Road Wheels Per Side
Traction	Dual Hydrostatic Pump
Weight	913 kg
Wheelbase	79.2 cm
Width	104.1 cm
Width - With Bucket	104.1 cm

Disclaimer

*Per ISO 14397-1

Accessories

Road Wheel Kit, Dingo TX 413, 420 and 425 Compact Utility Loader (Part number 106-7620)

Reference Guide Kit, Dingo TX Compact Utility Loaders (Part number 107-9310)

TRACK-AGGRESSIVE TREAD, WIDE (Part number 108-9749)

PREMIUM ENGINE OIL 10W30 (55 GAL) (Part number 121-6392)

PREMIUM ENGINE OIL 10W30 (5 GAL) (Part number 121-6393)

PREMIUM ENGINE OIL 15W40 (55 GAL) (Part number 121-6394)

PREMIUM ENGINE OIL 15W40 (5 GAL) (Part number 121-6395)

PX HYD FLUID (5 GAL) (Part number 133-8086)

PX HYD FLUID (55 GAL) (Part number 133-8087)

PX HYDRAULIC FLUID-4 PK GALLON (Part number 138-9460)

SCREEN-SPARK ARRESTOR (Part number 142-7683)

KIT-TX427/525 SNOW THROWER POWER (Part number 144-2512)

LIGHT KIT ASM (Part number 144-7101)

DECAL KIT - HERC (Part number 145-6942)

Adjustable Forks, TX 1000 Compact Utility Loaders (Part number 22341)

Loader Bucket Attachment (Part number 22409)

Use this standard bucket for moving rock, dirt, sand or other materials off and around the job site. The hardened steel cutting edge offers improved cutting and digging capability for better performance to handle tough digging conditions and affords superior wear. Capacity = 1 m³ (4 cubic feet)

Light Materials Loader Bucket Attachment (Part number 22410)

Designed for moving light materials like chip-bark, mulch, snow and loam. The larger capacity bucket, 0.2 m³, is great for handling larger loads of lighter materials. The hardened steel cutting edge allows for improved cutting and digging capability for better performance to handle tough digging conditions and affords superior wear.

Utility Blade Attachment (Part number 22414)

The Toro Dingo hydraulic blade greatly increases the versatility of your Dingo system. This incredibly versatile attachment can be used for a variety of earth or snow moving jobs. Fill trenches where rows of trees have been planted or irrigation pipes have been installed. Keep your hydraulic blade working in the winter by pushing snow from pavements in one pass.

Bore Drive Head Attachment (Part number 22420)

The Toro® Dingo® boring unit allows you to dig under pavements and driveways to simplify irrigation and cable installations. Shorter rod lengths and the ability to lower the bore head below grade allow you to work in both confined and open areas, increasing your productivity.

Rod and Reamer Kit (Part number 22421)

Easily bore under driveways and pavements to simplify irrigation and cable installations. Use with Bore Drive Head attachment model 22420. Working depth: 48 cm. Bits and reamers up to 8.9 cm (3.5") in diameter.

Multi-Purpose Tool, Dingo (Part number 22423)

Power Box Rake Attachment (Part number 22426)

The Toro Power Box Rake is the perfect tool for seed bed and sod bed preparation. The rotary drum on the power box rake pulverizes rough soil, cuts high spots and fills low spots in one pass; while removing rocks and debris. Pure carbide teeth design produces the best possible seeded sub-soil, which promote superior moisture retention and rapid seed growth.

Stump Grinder Attachment (Part number 22429)

The Toro® Dingo® Stump Grinder easily attaches to either Dingo or Dingo TX compact utility loaders. Make grinding stumps quicker and more productive with the stump grinder attachment for your Toro Dingo.

Tree Fork Attachment (Part number 22438)

The Toro Dingo hydraulic tree forks can help you plant trees and large shrubs quickly and effortlessly, plus move all sorts of materials around your garden center or nursery. The Dingo Compact Utility Loader is especially easy to manoeuvre, helping you transport and position trees or shrubs exactly where you want them.

Cement Mixer Attachment (Part number 22442)

This unique attachment will mix and pour up to 200 pounds (90.7 kg) of dry cement. The specially designed auger flighting inside the cement bowl keeps the cement in the bowl during mixing. This same auger design permits cement to be poured into fence post holes with the posts in place!

Tiller Attachment (Part number 22445)

The Toro Dingo tiller attachment greatly increases the productivity and performance of your Dingo system. Break through hard soil conditions up to 15 cm (6") deep. Avoid clogging the tiller by using one easy hand control to reverse the direction of the tiller to clear jams from rocks and debris.

Trencher Crumber (Part number 22464)

Spring design, trencher accessory to help clean out trenches

Trench Filler, Compact Utility Loader (Part number 22472)

High Torque Trencher Attachment (Part number 22473)

High-torque trencher head with heavy-duty drive system guarantees performance in the toughest soil conditions from rock to caliche. Dig trenches up to 127cm below grade. Heavy-duty nose roller bearing and reversible abrasion-resistant boom give you years of dependable use.

High Speed Trencher Attachment (Part number 22474)

Ideal for fast, efficient trenching in most soil conditions. Great for cable, pipe or irrigation installations.

4-in-1 Bucket Loader Bucket Attachment (Part number 22478)

Designed to be used on the Dingo 323, 320-D, e-Dingo, TX 427, TX 525 and TX 1000 models, this attachment offers the versatility of 4 attachments. Use as a standard bucket, a leveler, a grapple rake and a blade.

Narrow Loader Bucket Attachment (Part number 22520)

Handle compact construction and remodelling sites by moving through 91.4cm gates without a problem. This 87.6cm wide bucket allows you to get through narrow spaces, including gates and doorways. Move rock, dirt, sand or other materials off and around the job site. Great for use on any Dingo® model equipped with narrow wheels and tyres.

Grapple Rake Attachment (Part number 22577)

The Toro grapple rake attachment allows operators to grab, drag, lift, and place materials with ease. The grapple has two heavy-duty cylinders capable of producing 1361 kg of clamping force at the tine tips, insuring you can "grab-ahold" and not let go.

FLOOR SCRAPER (Part number 22673)

High Torque Auger Attachment (Part number 22805)

In any drive head, there is a trade-off between torque (power) and speed (revolutions per minute). The high torque head provides a large amount of torque to the auger at a slower speed. The high torque translates into the Dingo's capability to dig 30" (76.2 cm) holes up to 6' (1.8 m) deep in clay, gravel, sandstone and many other conditions where lower torque heads get stuck.

Mini Skid Steer Auger Attachment (Part number 22806)

This attachment swivels in all directions to create plumb holes on uneven terrain. The higher speed of this auger power head is ideal for augers up to 24" (61cm) in diameter. Quickly change between auger bit sizes to dig holes for fence posts, footings, irrigation heads and more!

18" Auger Bit (Part number 22814)

18" Auger Bit, requires 22805 or 22806

24" Auger Bit (Part number 22815)

24" Auger Bit, requires 22805 or 22806

30" Auger Bit (Part number 22816)

30" Auger Bit, requires 22805 or 22806

12" Auger Extension (Part number 22818)

12" Auger Extension - add onto any auger to increase depth

24" Auger Extension (Part number 22819)

24" Auger Extension - add onto any auger to increase depth

6" Full Flight Auger Bit (Part number 22820)

6" Full Flight Auger Bit - requires 22805 or 22806

9" Full Flight Auger Bit (Part number 22821)

9" Full Flight Auger Bit - requires 22805 or 22806

12" Full Flight Auger Bit (Part number 22822)

12" Full Flight Auger Bit - requires 22805 or 22806

15" Full Flight Auger Bit (Part number 22823)

15" Full Flight Auger Bit - requires 22805 or 22806

Vibratory Plough Attachment (Part number 22911)

The Toro® Dingo® vibratory plow attachment greatly reduces a contractor's time spent on irrigation and cable installations. Exclusively designed and built by Toro specifically for use on the Dingo, the vibratory plow optimizes pipe-pulling performance while minimizing turf damage during an installation. Also, use the chuted blade and spool carrier to install wire or cable.

Soil Cultivator Attachment (Part number 23102)

The soil cultivator is the ultimate attachment for soil preparation! This incredibly versatile attachment can be used to cultivate and level soil as well as blend landscape materials, compost and fertiliser. This attachment will also bury debris such as stones, soil clods and grass. It transforms rough terrain into a perfect planting bed in one pass.

Concrete Breaker, Dingo Compact Utility Loaders (Part number 23135)

Backhoe Kit, Dingo TX (Part number 23162)

Backhoe, Dingo Compact Utility Loader (Part number 23163)

Leveller Attachment (Part number 23165)

This versatile and highly productive tool is a must-have attachment for all job sites. Use to grade, finish, and spread landscape materials, backfill trenches, and break up the turf. Also great for carrying and transporting materials around the job site.

30IN STANDARD BUCKET (Part number 23174)

30IN PALLET FORK (Part number 23175)

30IN GRAPPLE (Part number 23176)

Parts & Manuals

Select your model year from the options below to view parts & manuals.

22324 Serial number
415000000-999999999
413000000-414999999
410300000-412999999
409930000-410299999
409360000-409929999
407960000-409359999
407600000-407959999
405700000-407599999
404785000-405699999
404500000-404784999
401800000-404499999
400000000-401799999
316000001-316999999
315000001-315999999
314000001-314999999
313000001-313999999
312000001-312999999
311000001-311999999
310000001-310999999
290000501-290999999
290000001-290000500

Warranty

For complete product warranty information, contact Toro Customer Service

22324 Product Warranty

**See dealer for Warranty details.