GrandStand® MULTI FORCE 52 in. (132 cm) 26.5 hp 747cc EFI
Product Information
- Model #: 72530
- Serial #: 415300000 - 416599999
- Product Type: Riding Products
Loading...
Assembly Drawings
Search for a part within assembly drawings:
-
Operator's Manual
-
Product Warranty
FILTER-AIR CLEANER (Part # 100-4556)
FILTER-AIR, SAFETY (Part # 103-1326)
HYPR-OIL 500 -QUART (Part # 114-4713)
HYPR-OIL 500-GALLON (Part # 114-4714)
HYPR-OIL 500-5 GALLON (Part # 114-4715)
HARNESS-WIRE, SPLITTER (Part # 121-5988)
SPARK PLUG (CHAMPION XC12 (Part # 130-8380)
FILTER-FUEL (Part # 130-8381)
Toro Premium Fuel Treatment (Part # 131-6572)
Speed Setting Tool (Part # 132-7595)
Trash Bag Asm - GrandStand (Part # 133-1435)
ROLLER STRIPER KIT-GRANDSTAND (Part # 133-1436)
Light Kit - GrandStand (Part # 133-1437)
Electric Accessory Port (Part # 133-1438)
HOC SET BLOCKS-GRANDSTAND (Part # 133-1439)
ANTI-SCALP KIT, 48/52 GRANDSTAND DECKS (Part # 133-1440)
Trimmer Rack, GrandStand Mower (Part # 133-1441)
OIL CHANGE KIT (Part # 133-1457)
Flasher Light Kit (Part # 133-1495)
BUCKET-5 GALLON (Part # 133-2533)
Wheel Weight Kit (Part # 133-5386)
Quick Attach - Male (Part # 136-0513)
HYDRAULIC CAP LOCK KIT (Part # 136-5420)
CASE DRAIN KIT (Part # 136-7436)
EC FLOAT KIT - MULTIFORCE (Part # 136-8350)
BROOM RUBBER FLAP KIT (Part # 137-3920)
Bagger Enhancement Kit, Grandstand Mower (Part # 139-1529)
Idler Kit, Blower Kit for GrandStand Multi Force Mower (Part # 139-1546)
RECYCLER KIT-G3/GRANDSTAND, 52 (Part # 139-6653)
18X8.5N10 X-TWEEL TURF (Part # 139-7890)
BLADE-FLOW, HIGH (Part # 140-1242)
SNOW TIRE KIT (Part # 140-4310)
PNEUMATIC CASTOR WHEEL KIT (Part # 140-4311)
BLADE-18.00 MEDIUM FLOW (Part # 140-4856)
BLADE-18.00 LOW FLOW (Part # 140-4857)
BLADE-18.00 ATOMIC (Part # 140-4858)
BLADE-18.00 RECYCLER (Part # 140-4859)
6 PACK-BLADE, 18.00 HIGH FLOW (Part # 140-4882)
6 PACK-BLADE, 18.00 MED FLOW (Part # 140-4883)
6 PACK-BLADE, 18.00 LOW FLOW (Part # 140-4884)
6 PACK-BLADE, 18.00 ATOMIC (Part # 140-4885)
6 PACK-BLADE, 18.00 RECYCLER (Part # 140-4886)
2 TRANSMISSION FILTER KIT (Part # 144-3842)
BLADE-18.00 HIGH FLOW (Part # 147-6251)
6 PACK-BLADE, 18.00 HIGH FLOW (Part # 147-6255)
KIT-PNEUMATIC CASTER TIRE (Part # 161-3470)
KIT-SEMI PNEU CASTER TIRE (Part # 161-3471)
3bu. Soft Bagger, 36" and Larger Mower Decks (Part # 30104)
10W30 4-CYCLE ENGINE OIL 32 OZ BOTTLE (Part # 38280)
TORO 4-CYCLE SAE 30 OIL (32OZ BOTTLE) (Part # 38903)
G-STD TWIN BAGGER KIT (Part # 78524)
GrandStand E-Z Vac Blower & Drive Kit for 52" Deck (Part # 78526)
The patent-pending side-mounted Soft Twin Bagger has a large 10 cu. ft. (8 bushel) (0.28 m3) capacity and the vertically-mounted blower allows for excellent maneuverability in tight spaces and maximum visibility.
Easily Removeable: Bagger frame conveniently removes with three pins and one bolt, while bagger removes simply with one pin and latch.
Compact: The side-mounted bagger offers a smaller width dimension
Side-Mounted: Only stand-on machine with a side bagger to provide maximum visibility and excellent maneuverability
Belt-Driven: The blower/bagger system engages automatically with no additional engine required.
Easily Removeable: Bagger frame conveniently removes with three pins and one bolt, while bagger removes simply with one pin and latch.
Compact: The side-mounted bagger offers a smaller width dimension
Side-Mounted: Only stand-on machine with a side bagger to provide maximum visibility and excellent maneuverability
Belt-Driven: The blower/bagger system engages automatically with no additional engine required.
MULTI FORCE Pro Force Debris Blower (Part # 78593)
The Pro Force Blower has a 360º nozzle rotation and utilizes the MULTI FORCE 26.5 hp Kohler® Command Pro™ EFI engine to deliver tremendous air power for fast removal of grass clippings, leaves, or other debris.
Additional parts required. Low-Flow Hydraulics Kit (Boss) - part # MSC13950
Additional parts required. Low-Flow Hydraulics Kit (Boss) - part # MSC13950
MULTI FORCE Power Broom (Part # 78596)
NEW 55" (139.7 cm) Power Broom designed to tackle sidewalks and clear snow and debris down to the pavement.
Additional Parts required. (If you already have the BOSS plow attachment you will only need part # 78601.)
High-Flow Hydraulics Kit (Toro) - part # 78601
Low-Flow Hydraulics Kit (Boss) - part # MSC13950
Triangle Attachment Plate (Toro) - part # 136-0513
High-Flow Hydraulics Kit (Toro) - part # 78601
Low-Flow Hydraulics Kit (Boss) - part # MSC13950
Triangle Attachment Plate (Toro) - part # 136-0513
MULTI FORCE MULCH FORCE Mulch Dump (Part # 78597)
You have a job to do, and you want to get it done efficiently. Moving and spreading mulch is no easy task, especially when you use an oldfashioned wheelbarrow. Get with the times – the Toro MULCH FORCE bucket helps you to move nearly twice as much mulch three times as fast per load as using a traditional wheelbarrow. The hydraulically driven MULCH FORCE dump enables you to easily dump the exact amount in tree rings or retainers. This is mulch efficiency at its finest.
Additional parts required.
Low-Flow Hydraulics Kit (Boss) - part # MSC13950
Additional parts required.
Low-Flow Hydraulics Kit (Boss) - part # MSC13950
MULTI FORCE Snow Thrower (78598) (Part # 78598)
NEW 48" (122 cm) Snow Thrower designed to tackle sidewalks and clear snow down to the pavement. Urethane trip edge to help plow over manhole covers, cracks, and cobblestone.
Additional Parts required. (If you already have the BOSS plow attachment you will only need part # 78601.)
High-Flow Hydraulics Kit (Toro) - part # 78601
Low-Flow Hydraulics Kit (Boss) - part # MSC13950
Wheel Weight Kit (MULTI FORCE 2016 and newer) - part # 133-5386
Pneumatic Castor Wheel Kit (2 Tires) - part # 140-4311
Additional Parts required. (If you already have the BOSS plow attachment you will only need part # 78601.)
High-Flow Hydraulics Kit (Toro) - part # 78601
Low-Flow Hydraulics Kit (Boss) - part # MSC13950
Wheel Weight Kit (MULTI FORCE 2016 and newer) - part # 133-5386
Pneumatic Castor Wheel Kit (2 Tires) - part # 140-4311
GRANDSTAND MULTI FORCE HIGH-FLOW KIT (Part # 78601)
MULTI FORCE Dethatcher (Part # 78690)
Turn your Toro Grandstand Multi-Force into the ultimate spring clean-up tool with Multi-Force front-mount Tine Rake Dethatcher. Use the rake for the first mowing of the spring to remove thatch, embedded leaves and debris. The patented tines lift thatch without damaging healthy turfgrass. And comb matted grass gives the lawn a clean, hand-raked appearance.
DETHATCHER MOUNT, MULTI-FORCE (Part # 78691)
MULTI FORCE Aerator (Part # 78694)
Transform your Grandstand Multi-Force into an aerator with the 38-inch wide Multi-Force Hooker Aerator. You'll finish jobs faster than ever, as the aerator punctures up to six holes per square foot. Holes are approximately 1/2" wide by 1-1/4" long and up to 3" deep. Tines pierce deep into the soil, hooking and lifting loose plugs of dirt that disperse quickly, spreading nutrients over the surface. No unsightly hard plugs accumulate on the lawn. The lifting action of the tines prevents soil compaction that is common with hollow tine aerators and allows good filtration of air and water into the lawn.
AERATOR MOUNT, MULTI-FORCE (Part # 78695)
MULTI FORCE Leaf Plow (Part # 78697)
The heavy-duty GrandStand MULTI FORCE Leaf Blade Plow attachment uses the mower's power to quickly move piles of leaves. It virtually eliminates "tarping" and moves windrowed leaves for collection. The one-piece, 55" (139.7 cm) wide galvanized steel blade has supports at the top, center and bottom for durability. The Leaf Blade rides on two adjustable caster wheels. Flat 4.5" (11.4 cm) long stainless spring steel tines allow the Plow to push leaves on uneven surfaces without damaging turfgrass. The Leaf Blade may be folded up over the deck to reduce space on the trailer.
Additional Parts required.
Leaf Plow Mount (Toro) - part # 78698
Additional Parts required.
Leaf Plow Mount (Toro) - part # 78698
LEAF PLOW MOUNT ONLY, MULTI-FORCE (Part # 78698)
Spark Arrestor (Meets USDA Forest Service Standard 5100-1A) (Part # 98-9099)
FILTER-OIL (Part # 98020)
KIT-SNOW DEFLECTOR, HTX (Part # MSC04587C)
PLOW SHOE KIT (Part # MSC13040)
BLADE EXTENSION KIT,6IN,STB (Part # MSC13850B)
GrandStand Plow Kit (Part # MSC13960)
KIT-PLOW SIDE,4'0"STB,GRANDSTAND (Part # MSC14780)
5'0" ATV Poly Straight-Blade Crate (Part # STB13567B)
Designed specifically for compact vehicle applications including ATVs, BOSS straight-blade plows are built to withstand the elements. When the plow is shipped, the blade crate contains the completely assembled blade (halves for a v plow) minus the coupler, hydraulics & electrical components that are part of the Plow Box.
BOSS® Plow Blade attachment for the Toro GrandStand MULTI FORCE.
Additional Parts required.
Grandstand MULTI FORCE plow side kit - part # MSC23000 BOSS® Plow Blade attachment for the Toro Dingo.
Additional Parts required.
BOSS 5’ plow side kit - part #MSC13960
Additional Parts required.
Grandstand MULTI FORCE plow side kit - part # MSC23000 BOSS® Plow Blade attachment for the Toro Dingo.
Additional Parts required.
BOSS 5’ plow side kit - part #MSC13960
4'0" ATV Poly Straight-Blade Crate (Part # STB13759B)
Designed specifically for compact vehicle applications including ATVs, BOSS straight-blade plows are built to withstand the elements. When the plow is shipped, the blade crate contains the completely assembled blade (halves for a v plow) minus the coupler, hydraulics & electrical components that are part of the Plow Box.
BOSS® Plow Blade attachment for the Toro GrandStand MULTI FORCE.
Additional Parts required.
Grandstand MULTI FORCE plow side kit - part # MSC23000 BOSS® Plow Blade attachment for the Toro Dingo.
Additional Parts required.
BOSS 4’ plow side kit - part #MSC14780
Additional Parts required.
Grandstand MULTI FORCE plow side kit - part # MSC23000 BOSS® Plow Blade attachment for the Toro Dingo.
Additional Parts required.
BOSS 4’ plow side kit - part #MSC14780
Plow Urethane Edge Kit (Part # STB13801)
-
Model #
72530 -
Serial #
415300000 - 416599999 -
Product Name
GrandStand® MULTI FORCE 52 in. (132 cm) 26.5 hp 747cc EFI -
Product Brand
Toro -
Product Type
Riding Products -
Product Series
Professional Grade Stand-on Mowers -
Chassis Type
Stand On -
Swath
52 inch / 132 cm -
Discharge
Side Discharge -
Engine/Motor Manufacturer
Kohler -
Engine/Motor Size
26.5 hp -
Engine/Motor Type
4 Cycle -
Engine Starter
Electric -
Transmission Type
Hydrostatic -
Traction Type
Rear WD
-
Engine: Battery
12V 300CCA -
Engine: Engine Speed
3600±100 RPM -
Engine: Spark Plug Gap
.030"/ .76mm -
Chassis: Height of Cut Range
1.5" - 5" (38-127mm) -
Engine: Ignition Coil Air Gap
.008-.016" / .2-.4mm -
Engine: Engine Oil Type
56 oz. (1.65 Liter) SAE SAE 30 -
Engine: Spark Plug
Champion XC12YC -
Drive System: Ground Speed
0-10 mph / 0-16kph -
Chassis: Tire Pressure
12-14psi (83-97kPa) -
Drive System: Gearbox Lubricant
HYPR-OIL 500 4.7 L (159 fl. oz.)