Dingo® 320-D Mini Skid Steer

Model: 22337CP

Patented 4-Paw Independent Four-Wheel Drive
2-Pump Hydraulic System
Easy-to-reach 4-stick fingertip hand controls

Top

Overview

The labor-saving Dingo® 320-D gives you greater capability and effortless maneuverability so you can get more done with less time in a short learning curve-even for new operators.

Features

Dingo 320D wheeled digging holes using the auger attachment

4-Paw® Independent 4-Wheel Drive

Directs hydraulic flow and pressure to all the wheels, at all times. You can power through the toughest conditions and reduce the likelihood of getting stuck. The 4-Paw eliminates the use of chains - reducing maintenance and eliminating the chance of a broken chain.

Dingo 322 with the grapple rake carrying a rock.

2-Pump Hydraulic System

Independent power can be supplied to the attachment or the wheels. The 2-pump system offers a high flow of 10.8 gpm (37.9 lpm) and a low flow of 4 gpm (15.1 lpm). This provides better usage of power to get the job done as well as not relying on one pump for shared power.

Highly Maneuverable

Short wheelbase design offers excellent maneuverability. Get into tight spaces where only hand labor could go before.

Dingo 320-D with the soil cultivator attachment

Fingertip Controls

Easy-to-reach 4-stick fingertip hand controls enable all functions from the operator position. The operator controls all movements of the machine and attachments with his fingertips.

Specifications

Air Filter	Two-stage, Heavy-duty, Remote
Cooling System	Liquid Cooled
Dump Angle	34 deg
Dump Height	47 in. / 119.3 cm
Engine Discplacement	719 cc (43.88 cu. in.)
Engine Horsepower	25 hp (18.6 kW) @ 3,600 rpm
Engine Make	Kubota
Engine Model	D722E3B
Fuel Tank	4 gal. / 15.1 L
Fuel Type	Diesel
Ground Clearance	5.8 in. / 14.7 cm
Ground Speed - Forward	Up to 3 mph / 4.8 km/h
Ground Speed - Reverse	Up to 3 mph / 4.8 km/h
Height	48.7 in. / 123.7 cm
Hinge Pin Height	66 in. / 167.6 cm
Hydraulic High-Flow Hydraulic Circuit	10.8 GPM
Hydraulic Low-Flow Hydraulic Circuit	4 GPM
Hydraulic Pressure	3,250 PSI
Length	62 in. / 157.5 cm
Length - With Bucket	82.2 in. / 208.8 cm
Loader Arms	Radial
Max Operating Height	91.2 in. / 231.6 cm
Oil Capacity	3.4 qt / 3.2 L
Rated Operating Capacity*	524 lbs / 237.6 kg
Reach - Fully Raised	28 in. / 71.1 cm
Reservoir Capacity	14.8 gal. / 56 L
Tip Capacity	1,048 lbs / 475 kg
Track Length	96.6 in. / 245.3 cm
Track Width	9.5 in. / 24.1 cm
Weight	1,722 lbs / 781 kg
Wheelbase	28 in. / 71.1 cm
Width - With Narrow Tires	35 in. / 88.9 cm
Width - With Standard Tires	40.5 in. / 102.8 cm

Disclaimer

*Per ISO 14397-1

Accessories

Tire Chain Kit, Dingo (Part # 100-4140)

HELMET-FACE SHIELD (Part # 100-4143)

Narrow Tire Assembly (Part # 104-0572)

Sitework Tire Tube (Part # 105-4070)

Rubber Foot Mat (Part # 105-5805)

Tube-Tire (18 X 8.50-8) (Part # 106396)

LEVER ASM-CONTROL (Part # 117-1844)

LEVER ASM-CONTROL (Part # 117-1846)

Solenoid Shutoff Kit, 320-D Compact Utility Loader (Part # 131-0569)

SPARE TIRE KIT ASM (Part # 144-0105)

TIRE AND WHEEL ASM, RH (Part # 144-2574)

TIRE AND WHEEL ASM, LH (Part # 144-2575)

LIGHT KIT ASM (Part # 144-7101)

Adjustable Forks, TX 1000 Compact Utility Loaders (Part # 22341)

Loader Bucket Attachment (Part # 22409)

Use this standard bucket for moving rock, dirt, sand or other materials off and around the job site. The hardened steel cutting edge offers improved cutting and digging capability for better performance to handle tough digging conditions and affords superior wear. Capacity = 4 cubic feet (1 cu. m.).

Light Materials Loader Bucket Attachment (Part # 22410)

Designed for moving light materials like chip-bark, mulch, snow and loam. The larger capacity bucket, 6.4 cubic feet (.2 cu. m.), is great for handling larger loads of lighter materials. The hardened steel cutting edge allows for improved cutting and digging capability for better performance to handle tough digging conditions and affords superior wear.

Utility Blade Attachment (Part # 22414)

The Toro Dingo hydraulic blade greatly increases the versatility of your Dingo system. This incredibly versatile attachment can be used for a variety of earth or snow moving jobs. Fill trenches where rows of trees have been planted or irrigation pipes have been installed. Keep your hydraulic blade working in the winter by pushing snow from sidewalks in one pass.

Bore Drive Head Attachment (Part # 22420)

The Toro® Dingo® boring unit allows you to dig under sidewalks and driveways to simplify irrigation and cable installations. Shorter rod lengths and the ability to lower the bore head below grade allow you to work in both confined and open areas, increasing your productivity.

Rod and Reamer Kit (Part # 22421)

Easily bore under driveways and sidewalks to simplify irrigation and cable installations. Use with Bore Drive Head attachment model 22420. Working depth: 19". Bits and reamers up to 3.5" in diameter.

Multi-Purpose Tool, Dingo (Part # 22423)

Power Box Rake Attachment (Part # 22426)

The Toro Power Box Rake is the perfect tool for seed bed and sod bed preparation. The rotary drum on the power box rake pulverizes rough soil, cuts high spots and fills low spots in one pass; while removing rocks and debris. Pure carbide teeth design produces the best possible seeded sub-soil, which promote superior moisture retention and rapid seed growth.

Stump Grinder Attachment (Part # 22429)

The Toro® Dingo® Stump Grinder easily attaches to either Dingo or Dingo TX compact utility loaders. Make grinding stumps quicker and more productive with the stump grinder attachment for your Toro Dingo.

Tree Fork Attachment (Part # 22438)

The Toro Dingo hydraulic tree forks can help you plant trees and large shrubs quickly and effortlessly, plus move all sorts of materials around your garden center or nursery. The Dingo Compact Utility Loader is especially easy to maneuver, helping you transport and position trees or shrubs exactly where you want them.

Cement Mixer Attachment (Part # 22442)

This unique attachment will mix and pour up to 200 pounds (90.7 kg) of dry cement. The specially designed auger flighting inside the cement bowl keeps the cement in the bowl during mixing. This same auger design permits cement to be poured into fence post holes with the posts in place!

Tiller Attachment (Part # 22445)

The Toro Dingo tiller attachment greatly increases the productivity and performance of your Dingo system. Break through hard soil conditions up to 6" (15.2 cm) deep. Avoid clogging the tiller by using one easy hand control to reverse the direction of the tiller to clear jams from rocks and debris.

Trench Backfiller Attachment (Part # 22472)

Designed for time and money-saving efficiency, this attachment lets operators fill trenches in a single pass. Two sets of opposing augers direct the spoils from the sides of the trench back into the hole, while the filler levels off the work area and fluffs the turf on each side of the trench minimizing its footprint

High Torque Trencher Attachment (Part # 22473)

High-torque trencher head with heavy-duty drive system guarantees performance in the toughest soil conditions from rock to caliche. Dig trenches up to 50" (127 cm) below grade. Heavy-duty nose roller bearing and reversible abrasion-resistant boom give you years of dependable use.

High Speed Trencher Attachment (Part # 22474)

Ideal for fast, efficient trenching in most soil conditions. Great for cable, pipe or irrigation installations.

4-in-1 Bucket Loader Bucket Attachment (Part # 22478)

Designed to be used on the Dingo 323, 320-D, e-Dingo, TX 427, TX 525 and TX 1000 models, this attachment offers the versatility of 4 attachments. Use as a standard bucket, a leveler, a grapple rake and a blade.

Narrow Loader Bucket Attachment (Part # 22520)

Handle compact construction and remodeling sites by moving through 36" (91.4 cm) gates without a problem. This 35" (88 cm) wide bucket allows you to get through narrow spaces, including gates and doorways. Move rock, dirt, sand or other materials off and around the job site. Great for use on any Dingo® model equipped with narrow wheels and tires.

Grapple Rake Attachment (Part # 22577)

The Toro grapple rake attachment allows operators to grab, drag, lift, and place materials with ease. The grapple has two heavy-duty cylinders capable of producing 3000 pounds of clamping force at the tine tips, insuring you can "grab-ahold" and not let go.

eDingo 500 with 30 inch floor scraper attachment

30" Floor Scraper Attachment (Part # 22673)

Discover the ultimate solution for effortless flooring removal - the Toro 30” Floor Scraper. Crafted with a laser-cut, all-steel construction frame, this tool ensures high performance and durability. At just under 30” width, the floor scraper effortlessly maneuvers through doorways and tight spaces, streamlining your flooring removal tasks.

Operational efficiency is a priority, which is why the frame is specifically designed to allow operators clear visibility of the blade, enhancing precision and effectiveness.

The Toro 30” Floor Scraper tackles any challenge with ease. From vinyl, quarry, and ceramic tiles to carpet squares, paint, glue, and more, no stubborn flooring material stands a chance against its power. Say farewell to tedious and time-consuming removal processes.

High Torque Auger Attachment (Part # 22805)

In any drive head, there is a tradeoff between torque (power) and speed (revolutions per minute). The high torque head provides a large amount of torque to the auger at a slower speed. The high torque translates into the Dingo's capability to dig 30" (76.2 cm) holes up to 6' (1.8 m) deep in clay, gravel, sandstone and many other conditions where lower torque heads get stuck.

Mini Skid Steer Auger Attachment (Part # 22806)

This attachment swivels in all directions to create plumb holes on uneven terrain. The higher speed of this auger power head is ideal for augers up to 24" (61cm) in diameter. Quickly change between auger bit sizes to dig holes for fence posts, footings, irrigation heads and more!

18" Auger Bit (Part # 22814)

18" auger bit requires auger power head attachment 22805 or 22806.

24" Auger Bit (Part # 22815)

24" auger bit requires auger power head attachment 22805 or 22806.

12" Auger Extension (Part # 22818)

Add extension to any auger to increase depth.

24" Auger Extension (Part # 22819)

Add extension to any auger to increase depth.

6" Full Flight Auger Bit (Part # 22820)

6" full flight auger bit requires auger power head attachment 22805 or 22806.

9" Full Flight Auger Bit (Part # 22821)

9" full flight auger bit requires auger power head attachment 22805 or 22806.

12" Full Flight Auger Bit (Part # 22822)

12" full flight auger bit requires auger power head attachment 22805 or 22806.

15" Full Flight Auger Bit (Part # 22823)

15" full flight auger bit requires auger power head attachment 22805 or 22806.

Vibratory Plow Attachment (Part # 22911)

The Toro® Dingo® vibratory plow attachment greatly reduces a contractor's time spent on irrigation and cable installations. Exclusively designed and built by Toro specifically for use on the Dingo, the vibratory plow optimizes pipe-pulling performance while minimizing turf damage during an installation. Also, use the chuted blade and spool carrier to install wire or cable.

Concrete Breaker, Dingo Compact Utility Loaders (Part # 23135)

Backhoe, Dingo Compact Utility Loader (Part # 23163)

Leveler Attachment (Part # 23165)

This versatile and highly productive tool is a must have attachment for all job sites. Use to grade, finish, and spread landscape materials, backfill trenches, and break up the turf. Also great for carrying and transporting materials around the job site.

30" Standard Bucket Attachment on the eDingo 500.

30" Standard Bucket (Part # 23174)

The 30" Standard Bucket is a powerhouse when it comes to moving concrete, rock, dirt, sand, or any other materials around the job site. Its slim 30" width allows for easy navigation through doorways and tight spaces, optimizing efficiency.

Designed with a hardened steel cutting edge, this bucket delivers exceptional cutting and digging capabilities, ensuring top-notch performance even in challenging digging conditions. Its superior wear resistance guarantees long-lasting durability.

With a generous capacity of just under 3 cubic feet (0.08 cu. m.), the 30" Standard Bucket is the perfect tool to tackle various material handling tasks on your project.

30" Adjustable Forks Attachment for the eDingo 500.

30” Adjustable Forks Attachment (Part # 23175)

Unlock the full potential of your Dingo system with the Toro Dingo 30” Adjustable Forks. Tailored specifically for the eDingo 500, these forks are the ultimate solution for seamless maneuvering through tight spaces during indoor construction and demolition tasks, elevating your productivity to new heights.

Versatility is the key to success, and these adjustable forks deliver just that. Perfectly suited for a wide range of material handling jobs, effortlessly move debris, pallets, and more around the job site with ease and efficiency. It's like having a reliable roving workstation that effortlessly transports heavy materials without causing fatigue.

Compatible with all Dingo models, except Dingo TXL 2000, our 30” Adjustable Forks are designed to integrate seamlessly with your existing equipment, saving you valuable time and effort.

30" Grapple Bucket attachment for the eDingo 500.

30" Grapple Bucket (Part # 23176)

The 30” Grapple Bucket is designed for contractors looking for a bucket to grab, drag, lift and remove demolition debris and materials on residential, commercial and demolition sites. With its slim 30” width, the bucket effortlessly maneuvers through doorways and tight spaces, streamlining your material handling tasks. Compatible with all Dingo models, except Dingo TXL 2000, our 30” Grapple Bucket is designed to integrate seamlessly with your existing equipment, saving you valuable time and effort.

TUBE (Part # 232-37)

ASM - WHEEL/TIRE (Part # 98-4709)

Spark Arrestor (Meets USDA Forest Service Standard 5100-1A) (Part # 98-9099)

Hydraulic Relief Valve Kit, Dingo (Part # 99-4360)

Documents

Title	Documents
Dingo® 323 & 320D Sell Sheet	PDF - Sellsheet-en-CA
Dingo® Full Line Brochure	PDF - Brochure-en-CA

Parts & Manuals

Select your model year from the options below to view parts & manuals.

22337CP Serial #
415300000-999999999
413000000-415299999
410400000-412999999
405700000-410399999
404340000-405699999
401350000-404339999
400000000-401349999
316000001-316999999
315000001-315999999
314000001-314999999
313000001-313999999
312000001-312999999
311000001-311999999

Warranty

For complete product warranty information contact Toro Customer Service

22337CP Product Warranty

**See dealer for Warranty details.