Discontinued

5000 Series Rear Discharge 60" (152 cm) 25 HP EFI 747cc (72943)

Model: 72943
UPC/EAN: 21038729435

Deluxe suspension seat features thick cushions, large bolsters, fully adjustable to match operator comfort
Unitized pump and wheel motor uses proven commercial hydraulic components while eliminating hoses and other potential leak points

Top

Overview

Z Master Professional 5000 Series mowers offer rear discharge decks for increased productivity in taller grass. These EFI models also use up to 25% less fuel than equivalent non-EFI mowers. The rear discharge design allows operators to trim on either side of the deck — no need to change direction to avoid discharging debris on roadways, sidewalks or flowerbeds. Clippings are dropped within the path of the mower, saving time and cleanup.

Features

7-Gauge, High-Strength Steel

The TURBO FORCE deck is constructed of 7-gauge, high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.

A Flat Crisp Cut with Precision Blades

(.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.

Deluxe Suspension Seat

Deluxe suspension seat features thick cushions, large bolsters and 3-D isolator mounts that absorb bumps and vibrations to reduce operator fatigue.

Smarter design in a bull-nose bumper

7-gauge bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 1/4" (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up also is significantly reduced.

Smooth, Powerful Response

The new unitized pump and wheel motor use proven commercial hydraulic components while eliminating hoses and other potential leak points. You'll get a smoother, faster response while enjoying an even more reliable machine.

Operator Information Center

The instrument panel includes a digital hour meter, fuel gauge, and voltage meter, as well as diagnostic indicators for the safety interlock system.

Folding Rollover Protection System ROPS

A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.

Cast Aluminum Spindle

Cools quickly for enhanced durability and performance.

Specifications

Adjustable Discharge Baffle	Standard
Air Filter	Heavy-Duty Canister Air Cleaner
Armrests	Standard
Blade Tip Speed	18,500 ft/min / 5,638 m/min
Blades	.25 in (.6 cm) thick heat-treated steel
CARB Compliant	CARB Compliant
Carrier Frame	3" x 1.5" x 10 gauge (7.6 cm x 3.8 cm x 10 gauge)
Caster Tires	13" X 6.5" – 6" (33 cm x 16.5 cm – 15.2 cm) Flat-Free Semi-Pneumatic
Clutch	Electromagnetic
Cup Holder	Standard
Deck Design	80-Grade 7-gauge 60" (152.4 cm) TURBO FORCE® Rear Discharge w/ bull-nose bumper
Deck Material	7 Gauge Steel
Deck Size	60 in / 152 cm
Discharge Chute	Rubber
Drive System	Unitized Pumps 12cc and Wheel Motors 14.6 cir
Drive Tires	24" x 12" – 12" (61 cm x 30.5 cm – 30.5 cm)
Engine	25 HP* (20 kw) Kohler® Command Pro EFI 747cc
Engine Brand	Kohler
Engine Displacement (cc)	747 cc
Engine Horsepower	25 hp
Forward Ground/Transport Speed	Up to 10.0 mph / 16.0 kph
Front Bumper	Reinforced Bull-Nose
Fuel Type	Gasoline
Greasable Bearings	Yes
Hour Meter	Standard
Hydraulic Fluid	Premium synthetic
Ignition	Electric
Number of Blades	3
Roll-Over Protection System (ROPS)	Folding; Standard
Seat	Handcrafted Deluxe Suspension Seat with Arm Rests Featuring Bullhorn Accent
Spindle Bearings	Greaseless Ball Bearings
Spindle Housing	9 in / 22.9 cm Diameter Cast Aluminum
Steering Controls	1-5/8" (4.1 cm) Diameter Grips; Adjustable, Dampened
Steering Dampeners	Standard Dampers

Disclaimer

*The gross horsepower of these engines was laboratory rated by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers will be significantly lower.

Accessories

KIT,HITCH [GEN II] (Part # 109-9487)

$138.59 USD

Hypr-Oil™ 500 (quart) (Part # 114-4713)

$15.39 USD

High Performance Hydro Oil

$15.39 USD

Hypr-Oil™ 500 (gallon) (Part # 114-4714)

$54.99 USD

High Performance Hydro Oil

$54.99 USD

Hypr-Oil™ 500 Hydraulic Oil (5 gallon) (Part # 114-4715)

$285.99 USD

Maximize commercial mower performance with Hypr-Oil™ 500. Tested and approved by Toro Engineering.

$285.99 USD

Bimini Folding Sunshade Assembly (Part # 115-4510)

$434.81 USD

Toro genuine Optional fabric sun shade provides protection and comfort by shielding the operator from the elements.

$434.81 USD

KIT,FRPS LIGHT (Part # 116-1154)

$540.09 USD

Seat Cover w/Arm Rest (Part # 117-0095)

$68.19 USD

Toro OEM Seat Cover W/Arm Rest will fit Z Masters. Make your old seat look like new! Plus, the extra padding offers a more comfortable ride.

$68.19 USD

Suspension Seat and Mount Kit (Part # 121-7596)

$285.99 USD

Toro suspension seat increases operator comfort and boosts productivity in ways you’ve never imagined. Mow longer without stopping and cut around even the most intricate landscaping at faster speeds with better results. When it comes to reliability, Toro delivers replacement parts designed to the exact engineering specifications of our equipment. For peace of mind, insist on Toro genuine parts.

$285.99 USD

SKID-BUMPER, DECK (WHITE) (Part # 126-0854)

$266.19 USD

Z-Master Anti-scalp & Wear Bar Kit (Part # 127-6650)

$419.09 USD

Toro OEM anti-scalp deck wheels and wear bar. These wheels help prevent the deck from coming in contact with the ground when passing over a high spot, thus preventing the blade from slicing off or "scalping" large clumps of grass.

$419.09 USD

Riding Mower Jack Mount Kit (Part # 127-6665)

Genuine Toro jack mount kit. Mounts to the front of the mower and allows the owner to raise the mower to gain access to the underside of the deck to check blades or wash the deck. To best protect your investment and maintain optimal performance of your turf equipment, count on Toro genuine parts. When it comes to reliability, Toro delivers replacement parts designed to the exact engineering specifications of our equipment. For peace of mind, insist on Toro genuine parts.

Riding Mower Jack Kit (Part # 127-6666)

$142.99 USD

Please contact your local dealer

Power Deck Lift Kit (Part # 132-5986)

$1,110.99 USD

Easily Raise and Lower your Z-Master cutting deck with the push of a button using this Toro power lift kit. Toro operator controlled discharge kit. When it comes to reliability, Toro delivers replacement parts designed to the exact engineering specifications of our equipment. For peace of mind, insist on Toro genuine parts.

$1,110.99 USD

Please contact your local dealer

KIT-LIGHT, LAZER LED WORK (Part # 135-7320)

$568.69 USD

MICHELIN® X® TWEEL® Turf Airless Radial Tires (24") (Part # 139-7891)

$877.79 USD

The MICHELIN® X® TWEEL® Turf Airless Radial Tires are the next “revolution” in commercial mowing has arrived. The MICHELIN X TWEEL Turf Airless Radial Tire has all the qualities you would want in a pneumatic tire but it never needs air. No more flats, downtime, patch kits or replacement tires. And in the area of wear and tear, this “tire” has a wear life that is three times that of a pneumatic.

$877.79 USD

Please contact your local dealer

20.5 Inch Atomic Blade (Part # 140-1241)

$28.34 USD

Toro OEM Atomic blade 20.5 Inch Atomic blades. Atomic blade is commonly referenced as a “Gator Style” or “Gator Blade”. Provides the best quality of cut while mulching. This Toro blade has multiple applications. Be sure to verify make and serial number to ensure the correct part.

$28.34 USD

20.50 Inch Low Flow Blade (Part # 140-1244)

$30.44 USD

Toro 20.5 Inch OEM Low -Flow blade. This sharp replacement Hi-Flow lawn mower blade provides a crisp, clean cut time after time. You can count on the quality and reliability of this Toro replacement Hi-Flow lawn mower blade. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.

$30.44 USD

Atomic 20.5 Inch Blade Pack (6) (Part # 140-4880)

$170.09 USD

Toro OEM Atomic blade pack. (6) 20.5 Inch Atomic blades. Atomic blade is commonly referenced as a “Gator Style” or “Gator Blade”. Provides the best quality of cut while mulching. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.

$170.09 USD

Riding Mower Toe board Weights (Part # 140-4958)

$166.09 USD

Toro genuine riding mower weight kit. Provides added stability on uneven terrain or when using rear mounted bagging attachments. When it comes to reliability, Toro delivers replacement parts designed to the exact engineering specifications of our equipment. For peace of mind, insist on Toro genuine parts.

$166.09 USD

TORO RIDER OVER SEAT BAG (Part # 490-7317)

Toro Titan Deluxe Cover (Part # 490-7319)

$150.99 USD

Toro OEM deluxe rider cover keeps your Titan riding lawn mower protected from the elements when not in use. Cover is made to withstand wear and tear and features elastic cord to keep cover in place. Perfect for equipment stored outside or for seasonal use. When it comes to reliability, Toro delivers replacement parts designed to the exact engineering specifications of our equipment. For peace of mind, insist on Toro genuine parts.

$150.99 USD

Toro Rider Arm Rest Bag (Part # 490-7320)

Toro genuine rider arm rest bag. When it comes to reliability, Toro delivers replacement parts designed to the exact engineering specifications of our equipment. For peace of mind, insist on Toro genuine parts.

SCREEN-ARRESTER, SPARK (Part # 75-6880)

$109.31 USD

Toro Filter Gauge for Kohler Engines (Part # 99-4664)

$113.29 USD

Toro genuine filter gauge. This Toro filter gauge shows when filters are nearing restriction limits, graduated indicators help you maximize filter life and effectively schedule service intervals. Toro would like to remind you that fitment can vary by sub model, serial number, and/or production date of your equipment. Please refer to the original owners manual in order to verify this is correct part for your machine.

$113.29 USD

KIT, TRASH HOLDER (Part # TC26)

$85.79 USD

Parts & Manuals

Select your model year from the options below to view parts & manuals.

72943 Serial #
400000000-999999999

5000 Series Rear Discharge 60" (152 cm) 25 HP EFI 747cc (72943)

Overview

Features

7-Gauge, High-Strength Steel

A Flat Crisp Cut with Precision Blades

Deluxe Suspension Seat

Smarter design in a bull-nose bumper

Smooth, Powerful Response

Operator Information Center

Folding Rollover Protection System ROPS

Cast Aluminum Spindle

Specifications

Accessories

Parts & Manuals

Warranty

For complete product warranty information contact Toro Customer Service

Customer Reviews