Discontinued

5000 Series 48" (122 cm) 23 HP EFI 747cc (72904)

Model: 72904
UPC/EAN: 21038729046

Deluxe suspension seat features thick cushions, large bolsters and 3-D isolator mounts that absorb bumps and vibrations to reduce operator fatigue, fully adjustable to match operator comfort
Our TURBO FORCE deck features heat-treated steel blades and our patented adjustable discharge chute, nothing cuts as fast or as well
Unitized pump and wheel motor uses proven commercial hydraulic components while eliminating hoses and other potential leak points

Top

Overview

Z Master® 5000 - 23 hp Kohler® CommandPRO EFI 747cc Engine with 48 in (122 cm) TURBO FORCE® deck. Model Shown 74915.

Features

Deluxe Handcrafted Seat with Arm Rests

Ultimate padding and back support with a handcrafted seat with arm rests and bullhorn logo.

Exclusive TURBO FORCE Deck

High-capacity TURBO FORCE decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE decks can be fine-tuned in order to conquer changing turf conditions.

7-Gauge, High-Strength Steel

The TURBO FORCE deck is constructed of 7-gauge, high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.

A Flat Crisp Cut with Precision Blades

(.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.

Rubber Discharge Chute

High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.

Smarter design in a bull-nose bumper

7-gauge bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 1/4" (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up also is significantly reduced.

Patented Adjustable Baffle

Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximize discharge velocity.

Smooth, Powerful Response

The new unitized pump and wheel motor use proven commercial hydraulic components while eliminating hoses and other potential leak points. You'll get a smoother, faster response while enjoying an even more reliable machine.

Operator Information Center

The instrument panel includes a digital hour meter, fuel gauge, and voltage meter, as well as diagnostic indicators for the safety interlock system.

Folding Rollover Protection System ROPS

A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.

Cast Aluminum Spindle

Cools quickly for enhanced durability and performance.

Specifications

Adjustable Discharge Baffle	Standard
Air Filter	Heavy-Duty Canister Air Cleaner
Blade Tip Speed	18,500 ft/min / 5,638 m/min
Blades	.25 in (0.6 cm) thick heat-treated steel
Carrier Frame	3 in x 1.5 in (7.6 x 3.8 cm) x 10 gauge
Caster Tires	13 in x 5 in - 6 in (33 cm x 12.7 cm - 15.2 cm) flat-free semi-pneumatic
Deck Design	80-Grade 7-gauge 48 in (122 cm) TURBO FORCE® w/bull-nose bumper
Deck Material	7 Gauge Steel
Deck Size	48 in / 122 cm
Discharge Chute	Rubber
Drive System	Hydraulic Unitized Pumps and Wheel Motors
Drive Tires	23 in x 9.5 in -12 in (58 cm x 24 cm - 30.5 cm)
Engine	23 HP* Kohler® Command PRO EFI 747cc
Engine Brand	Kohler
Engine Displacement (cc)	747 cc
Engine Horsepower	23.0 hp
Forward Ground/Transport Speed	Up to 10.0 mph / 16.0 kph
Front Bumper	Reinforced Bull-Nose
Fuel Type	Gasoline
Hour Meter	Standard
Hydraulic Fluid	Premium synthetic
Roll-Over Protection System (ROPS)	Folding; Standard
Seat	Handcrafted Deluxe Suspension Seat with Arm Rests Featuring Bullhorn Accent
Spindle Bearings	Greaseless Ball Bearings
Spindle Housing	9 in / 22.9 cm Diameter Cast Aluminum
Steering Controls	1-5/8" (4.1 cm) Diameter Grips; Adjustable, Dampened

Disclaimer

*The gross horsepower of this engine was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission, and operating requirements, the actual engine horsepower on this class of mower will be significantly lower.

Accessories

16.5 Inch Hi-Flow Blade (Part # 107-3192-03)

$29.69 USD

Toro 16.5 Inch OEM Hi-Flow blade. This sharp replacement Hi-Flow lawn mower blade provides a crisp, clean cut time after time. You can count on the quality and reliability of this Toro replacement Hi-Flow lawn mower blade. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.

$29.69 USD

16.5 Low Flow Blade (Part # 107-3193-03)

$30.44 USD

Toro 16.5 Inch OEM Low Flow blade. Low Flow mower blades have slightly curved ends that keep air Flow to a minimum. The lack of suction allows cut grass to exit the mower while keeping dust and debris levels down. Toro Low Flow mower blades cause less engine strain than Hi-Flow blades. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.

$30.44 USD

16.5 Medium Flow Blade (Part # 107-3194-03)

$25.19 USD

Toro 16.5 Inch OEM Medium Flow blade. Medium Flow mower straight edge, standard discharge blade. These blades have slight upward angle on the edges. Great blades for use when horsepower is a concern. Produce medium Flow but requires less horsepower than Hi-Flow blades. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.

$25.19 USD

16.5 Atomic Blade (Part # 107-3195-03)

$36.74 USD

Toro 16.5 Inch OEM Atomic blade. The Toro Atomic blade is commonly referenced as a “Gator Style” or “Gator Blade”. Provides the best quality of cut while mulching. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.

$36.74 USD

16.5 Inch Recycler Blade (Part # 107-3196-03)

$29.39 USD

Toro 16.5 Inch OEM Recycler blade. Recycler straight edge, standard discharge blade. The blade is designed for a High quality cut and long-lasting durability. These blades are designed with “wings,” called “accelerators” that kind of act like a fan — forcing the tiny bits of grass back into the earth. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.

$29.39 USD

Z-Master Anti-Scalp Kit (Trim Side) (Part # 108-4140)

$151.79 USD

Toro OEM anti-scalp deck wheels. These wheels help prevent the deck from coming in contact with the ground when passing over a high spot, thus preventing the blade from slicing off or "scalping" large clumps of grass.

$151.79 USD

KIT,HITCH [GEN II] (Part # 109-9487)

$138.59 USD

Hi-Flow Blade Pack (6) (Part # 110-0414)

$170.09 USD

Toro 16.5 Inch OEM Hi-Flow blade pack. (6) Hi-Flow blades. This sharp replacement Hi-Flow lawn mower blade provides a crisp, clean cut time after time. You can count on the quality and reliability of this Toro replacement Hi-Flow lawn mower blade. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.

$170.09 USD

Low Flow 16.5 Inch Blade Pack (6) (Part # 110-0415)

Toro 16.5 Inch OEM Low Flow blade pack. (6) Low Flow blades. Low Flow mower blades have slightly curved ends that keep air Flow to a minimum. The lack of suction allows cut grass to exit the mower while keeping dust and debris levels down. Toro Low Flow mower blades cause less engine strain than Hi-Flow blades. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.

Recycler 16.6 Inch Blade Pack (6) (Part # 110-0416)

Toro 16.5 Inch OEM Recycler blade pack. (6) Recycler blades. Recycler straight edge, standard discharge blade. The blade is designed for a High quality cut and long-lasting durability. These blades are designed with “wings,” called “accelerators” that kind of act like a fan — forcing the tiny bits of grass back into the earth. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.

Atomic 16.5 Inch Blade Pack (6) (Part # 110-0417)

Toro OEM Atomic blade pack. (6) 16.5 Inch Atomic blades. Atomic blade is commonly referenced as a “Gator Style” or “Gator Blade”. Provides the best quality of cut while mulching. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.

Mid Flow 16.5 Inch Blade Pack (6) (Part # 110-0418)

Toro 16.5 Inch OEM Medium Flow blade pack. (6) Medium Flow blades. Medium Flow mower straight edge, standard discharge blade. These blades have slight upward angle on the edges. Great blades for use when horsepower is a concern. Produce medium Flow but requires less horsepower than Hi-Flow blades. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.

Hypr-Oil™ 500 (quart) (Part # 114-4713)

$15.39 USD

High Performance Hydro Oil

$15.39 USD

Hypr-Oil™ 500 (gallon) (Part # 114-4714)

$54.99 USD

High Performance Hydro Oil

$54.99 USD

Hypr-Oil™ 500 Hydraulic Oil (5 gallon) (Part # 114-4715)

$285.99 USD

Maximize commercial mower performance with Hypr-Oil™ 500. Tested and approved by Toro Engineering.

$285.99 USD

Bimini Folding Sunshade Assembly (Part # 115-4510)

$434.81 USD

Toro genuine Optional fabric sun shade provides protection and comfort by shielding the operator from the elements.

$434.81 USD

48 inch Recycler Kit (GrandStand) (Part # 115-7466)

$466.39 USD

By adding the Toro Recycler system to your Toro 48-inch GrandStand mower, you create your own natural fertilizer. This patented system cuts grass clippings 6-8 times, turning them into a fine, nutrient-rich mulch to feed your lawn all season. The secret lies in the unique 'kickers' that direct clippings back into the blades to be re-cut before being released into your lawn to promote its health and vitality.

$466.39 USD

Please contact your local dealer

Roller Striping Kit (Part # 115-7470)

$286.64 USD

Toro OEM A mower striping kit. The ultimate way to enhance the striping ability of your Z-Master. When it comes to reliability, Toro delivers replacement parts designed to the exact engineering specifications of our equipment. For peace of mind, insist on Toro genuine parts.

$286.64 USD

KIT,FRPS LIGHT (Part # 116-1154)

$540.09 USD

Seat Cover w/Arm Rest (Part # 117-0095)

$68.19 USD

Toro OEM Seat Cover W/Arm Rest will fit Z Masters. Make your old seat look like new! Plus, the extra padding offers a more comfortable ride.

$68.19 USD

Operator-Controlled Discharge Chute Kit (Part # 117-3600)

$480.69 USD

Toro operator controlled discharge kit. When it comes to reliability, Toro delivers replacement parts designed to the exact engineering specifications of our equipment. For peace of mind, insist on Toro genuine parts.

$480.69 USD

Z Stand Kit for Z Master Riding Mower with 48", 52" or 60" Deck (Part # 121-4811)

$555.49 USD

Toro OEM deck stand kit. Allows for easy under deck access at the shop or in the field. When it comes to reliability, Toro delivers replacement parts designed to the exact engineering specifications of our equipment. For peace of mind, insist on Toro genuine parts.

$555.49 USD

Kit Assembly with Toro (Part # 121-7595)

$903.09 USD

Genuine OEM Part

$903.09 USD

Suspension Seat and Mount Kit (Part # 121-7596)

$285.99 USD

Toro suspension seat increases operator comfort and boosts productivity in ways you’ve never imagined. Mow longer without stopping and cut around even the most intricate landscaping at faster speeds with better results. When it comes to reliability, Toro delivers replacement parts designed to the exact engineering specifications of our equipment. For peace of mind, insist on Toro genuine parts.

$285.99 USD

Riding Mower Jack Mount Kit (Part # 127-6665)

Genuine Toro jack mount kit. Mounts to the front of the mower and allows the owner to raise the mower to gain access to the underside of the deck to check blades or wash the deck. To best protect your investment and maintain optimal performance of your turf equipment, count on Toro genuine parts. When it comes to reliability, Toro delivers replacement parts designed to the exact engineering specifications of our equipment. For peace of mind, insist on Toro genuine parts.

Riding Mower Jack Kit (Part # 127-6666)

$142.99 USD

Please contact your local dealer

Power Deck Lift Kit (Part # 132-5986)

$1,110.99 USD

Easily Raise and Lower your Z-Master cutting deck with the push of a button using this Toro power lift kit. Toro operator controlled discharge kit. When it comes to reliability, Toro delivers replacement parts designed to the exact engineering specifications of our equipment. For peace of mind, insist on Toro genuine parts.

$1,110.99 USD

Please contact your local dealer

Titan HD Series Bucket Mount Kit (Part # 137-9216)

$123.19 USD

Toro OEM bucket mount kit. Saves you time, money, and hassle when you’re in the seat trying to get the day's cutting done. Carry a five gallon bucket for trash collection right on the mower so you always have a place to put the trash that's found on the ground.

$123.19 USD

Trimmer Mount Kit (Part # 137-9769)

$192.49 USD

Toro OEM trimmer mount kit. Keep your trimmer securely mounted on your riding mower. When it comes to reliability, Toro delivers replacement parts designed to the exact engineering specifications of our equipment. For peace of mind, insist on Toro genuine parts.

$192.49 USD

Toro Titan Deluxe Cover (Part # 490-7319)

$150.99 USD

Toro OEM deluxe rider cover keeps your Titan riding lawn mower protected from the elements when not in use. Cover is made to withstand wear and tear and features elastic cord to keep cover in place. Perfect for equipment stored outside or for seasonal use. When it comes to reliability, Toro delivers replacement parts designed to the exact engineering specifications of our equipment. For peace of mind, insist on Toro genuine parts.

$150.99 USD

SCREEN-ARRESTER, SPARK (Part # 75-6880)

$109.31 USD

Blower and Drive Kit, 48in E-Z Vac for Z Master G3 Mower (Part # 78551)

48in and 52in E-Z Vac Twin Bagging System, Z Master G3 Mower (Part # 78562)

48in and 52in E-Z Vac DFS Collection System, Z Master G3 Mower (Part # 78566)

Toro Filter Gauge for Kohler Engines (Part # 99-4664)

$113.29 USD

Toro genuine filter gauge. This Toro filter gauge shows when filters are nearing restriction limits, graduated indicators help you maximize filter life and effectively schedule service intervals. Toro would like to remind you that fitment can vary by sub model, serial number, and/or production date of your equipment. Please refer to the original owners manual in order to verify this is correct part for your machine.

$113.29 USD

KIT, TRASH HOLDER (Part # TC26)

$85.79 USD

Parts & Manuals

Select your model year from the options below to view parts & manuals.

72904 Serial #
400000000-999999999

5000 Series 48" (122 cm) 23 HP EFI 747cc (72904)

Overview

Features

Deluxe Handcrafted Seat with Arm Rests

Exclusive TURBO FORCE Deck

7-Gauge, High-Strength Steel

A Flat Crisp Cut with Precision Blades

Rubber Discharge Chute

Smarter design in a bull-nose bumper

Patented Adjustable Baffle

Smooth, Powerful Response

Operator Information Center

Folding Rollover Protection System ROPS

Cast Aluminum Spindle

Specifications

Accessories

Blower and Drive Kit, 48in E-Z Vac for Z Master G3 Mower (Part # 78551)

48in and 52in E-Z Vac Twin Bagging System, Z Master G3 Mower (Part # 78562)

48in and 52in E-Z Vac DFS Collection System, Z Master G3 Mower (Part # 78566)

Parts & Manuals

Warranty

For complete product warranty information contact Toro Customer Service

Customer Reviews