570 Nozzle Adjustable, 10 ft (3 m)

Matched Precipitation Rate (MPR) ensures even water distribution Up to 25% radius reduction Easily installs onto any Toro spray or shrub sprinkler 0-360 degree adjustable pattern, 10' radius

Model: 53735
UPC/EAN: 21038537351

See All Items in 570 Adjustable Nozzle

$5.00 USD

Also available at select retailers:

Matched precipitation rate (MPR) ensures even water distribution — any pattern, any radius
Up to 25% radius reduction
Easily installs onto any Toro spray or shrub sprinkler
Built into the riser and restricts water loss by 99% if the nozzle is removed or damaged, eliminating potential erosion or safety concerns. Allows for “dry” nozzle and filter-replacement or maintenance, while the system is running.
Maintains constant 30 psi (2,1 Bar) psi outlet pressure, which minimizes misting and fogging caused by pressures above 30 psi (2,1 Bar).
Robust retraction spring and enhanced seal material ensures positive pop-up and retraction on all 570Z models.
Less visible, reducing damage from exposure or vandals.

Top

Overview

Toro 570 Nozzles are available in a wide selection of patterns to fit just about any landscape requirement. Toro's Matched Precipitation Rate (MPR) ensures that all nozzles water evenly regardless of pattern so you can mix and match without worry of over or under watered areas.

Features

X-flow® Water Shut-off Device

Built into the riser and restricts water loss by 99% if the nozzle is removed or damaged, eliminating potential erosion or safety concerns. Allows for “dry” nozzle and filter-replacement or maintenance, while the system is running.

Patented In-riser Pressure Regulator

Maintains constant 30 psi (2,1 Bar) psi outlet pressure, which minimizes misting and fogging caused by pressures above 30 psi (2,1 Bar).

Enhanced Retraction Spring and Wiper Seal

Robust retraction spring and enhanced seal material ensures positive pop-up and retraction on all 570Z models.

Small 2” (50mm) Diameter Cap

Less visible, reducing damage from exposure or vandals.

Specifications

Flow	0.72 - 2.11 GPM, based on arc @ 30 PSI (2.1 bar)
Optimum Operating Pressure	30 PSI (2.1 BAR)
Pattern	0 - 360 degrees, Adjustable
Product Style	Nozzles
Radius	10 ft (3m)
Recommended Operating Pressure	20 - 50 PSI (1.4 - 3.4 BAR)
Thread	Male

Warranty

For complete product warranty information contact Toro Customer Service

**See dealer for Warranty details.