36 in. (91 cm) Fixed Deck Gear Drive Pistol Grip (50-State)

Fixed Deck Gear Drive

Model: 39634

Find a Dealer

48" TURBO FORCE 7-gauge cutting deck w/patented adjustable baffle
Patented adjustable baffle allows operator to achieve maximum cutting performance
Massive 9-3/8" (24 cm) diameter spindle
5-Speed gearbox with 9 spline coupler
Horizon360^® Business Management Software. Work More Efficiently. Run More Profitably.

Top

Find a Dealer

Overview

14.5 HP Kawasaki® FS481V 603cc Engine with 36 in. (91 cm) TURBO FORCE cutting technology deck.

Features

Pistol Grip Control System

The individual handles make it easier to control tracking long straight lines. The release to go interlock, reduces operator fatigue.

Exclusive TURBO FORCE Deck

High-capacity 7/10 gauge TURBO FORCE deck delivers unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Easily handles the most demanding conditions and resists damage from impacts and abrasion.

Rubber Discharge Chute

High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.

Patented Adjustable Baffle

Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximize discharge velocity.

Smarter Design in a Bullnose Bumper

7-gauge bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 1/4" (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up also is significantly reduced.

Rugged Spindle Assembly

Rigorously tested to ensure that it can survive impacts that would destroy lesser spindles. The cast iron housing, with a massive 9-3/8" (23.8 cm) diameter base, absorbs impact loads and distributes them across a broader area of the robust deck shell. Built with maintenance-free sealed ball bearings.

Extended Life Drive System

Extended life drive system with Husqvarna Peerless 700 series transmission, featuring a 9-spline drive coupler.

A Flat Crisp Cut With Precision Blades

(.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.

Horizon360^® Business Management Software.

Managing and growing your business is hard work. Using a business management software system shouldn't make it harder. That is why we built Horizon360. If you can type and point/click a mouse, you have all the skills required.

For more information click here.

Specifications

Adjustable Discharge	Standard
Adjustable Discharge Baffle	Standard
Air Filter	2-Stage Air Cleaner
Blade Tip Speed	18,000 ft/min / 5,486 m/min
Box Dimensions	78 in. x 49.5 in. x 52.25 in. / 198.1 cm x 125.7 cm x 132.7 cm
Brake System	6 in. (15 cm) Band Brakes
CARB Compliant	CARB Compliant
Caster Tires	9 in. x 3.5 in. - 4 in. (23 cm x 9 cm - 10 cm) Flat-Free
Deck Design	36" (91 cm) TURBO FORCE
Deck Size	36 in / 91 cm
Discharge Chute	High-Performance 5/16" (8 mm) Rubber
Drive System	5-Speed Transmission
Drive Tires	13 in. x 6.5 in. - 6 in. (33 cm x 15 cm - 16.5 cm)
Engine	14.5 hp* Kawasaki® FS481V 603 cc
Engine Brand	Kawasaki
Engine Displacement (cc)	603 cc
Engine Horsepower	14.5 hp
Forward Ground/Transport Speed	Up to 6.2 mph / 9.9 kph
Fuel Capacity	5 gal. / 18.9 L / 20 Qt.
Fuel Type	Gasoline
Height of Cut	1.0 - 4.25 in. / 2.5 - 10.8 cm
Mulch, Bag, Side Discharge	Side discharge standard
Number of Blades	3
Product Type	Walk Behind Mowers
Product Use	Commercial
Spindle Housing	9.375 in / 23.8 cm Diameter Cast Iron
Start Type	Pull Cord, Recoil
Steering Controls	Pistol Grip
Transmission	5-Speed Gearbox with 9 Spline Coupler

Disclaimer

*The gross horsepower of this engine was laboratory rated by the engine manufacturer in accordance with SAE J1940. As configured to meet safety, emission, and operating requirements, the actual engine horsepower on this class of mower will be significantly lower.

Accessories

18 Inch Recycler Blade (Part # 105-7779-03)

$30.44 USD

Toro OEM Recycler blade. Recycler straight edge, standard discharge blade. The blade is designed for a High quality cut and long-lasting durability. These blades are designed with “wings,” called “accelerators” that kind of act like a fan — forcing the tiny bits of grass back into the earth. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.

$30.44 USD

18 Inch Medium Flow Blade (Part # 105-7794-03)

$27.29 USD

Toro OEM Medium Flow blade. Medium Flow mower straight edge, standard discharge blade. These blades have slight upward angle on the edges. Great blades for use when horsepower is a concern. Produce medium Flow but requires less horsepower than Hi-Flow blades. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.

$27.29 USD

18 Inch Low Flow Blade (Part # 105-7795-03)

$31.49 USD

Toro OEM Low Flow blade. Low Flow mower blades have slightly curved ends that keep air Flow to a minimum. The lack of suction allows cut grass to exit the mower while keeping dust and debris levels down. Toro Low Flow mower blades cause less engine strain than Hi-Flow blades. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.

$31.49 USD

18 Inch Atomic Blade (Part # 105-7796-03)

$27.29 USD

Toro OEM Atomic blade. The Toro Atomic blade is commonly referenced as a “Gator Style” or “Gator Blade”. Provides the best quality of cut while mulching. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.

$27.29 USD

18 Inch High Flow Blade (6 Pack) (Part # 108-1117)

$138.59 USD

This sharp replacement Hi-Flow lawn mower blade provides a crisp, clean cut time after time. You can count on the quality and reliability of this Toro replacement Hi-Flow lawn mower blade. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.

$138.59 USD

Atomic Blade Pack (6) (Part # 108-1118)

Toro OEM Atomic blade pack. (6) 18 Inch Atomic blades. Atomic blade is commonly referenced as a “Gator Style” or “Gator Blade”. Provides the best quality of cut while mulching. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.

Low Flow 18 Inch Blade Pack (6) (Part # 110-0406)

Toro 18 Inch OEM Low Flow blade pack. (6) Low Flow blades. Low Flow mower blades have slightly curved ends that keep air Flow to a minimum. The lack of suction allows cut grass to exit the mower while keeping dust and debris levels down. Toro Low Flow mower blades cause less engine strain than Hi-Flow blades. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.

Recycler 18 Inch Blade Pack (6) (Part # 110-0408)

$182.69 USD

Toro 18 Inch OEM Recycler blade pack. (6) Recycler blades. Recycler straight edge, standard discharge blade. The blade is designed for a High quality cut and long-lasting durability. These blades are designed with “wings,” called “accelerators” that kind of act like a fan — forcing the tiny bits of grass back into the earth. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.

$182.69 USD

Mid Flow 18 Inch Blade Pack (6) (Part # 110-0409)

Toro 18 Inch OEM Medium Flow blade pack. (6) Medium Flow blades. Medium Flow mower straight edge, standard discharge blade. These blades have slight upward angle on the edges. Great blades for use when horsepower is a concern. Produce medium Flow but requires less horsepower than Hi-Flow blades. This Toro blade has multiple applications. Be sure to verify model and serial number to ensure the correct part.

36 inch Bagger Enhancement Kit (Part # 110-2026)

$135.29 USD

Genuine OEM Part

$135.29 USD

36 Inch GrandStand Recycler Kit (Part # 110-2080)

$273.89 USD

By adding the Toro Recycler system to your Toro GrandStand riding mower, you create your own natural fertilizer. The 36 in. Recycler Kit, when installed on compatible 36 in. deck Toro zero turn riding mowers, gives it the capability to mulch grass by cutting it multiple times turning it into fine clipping pieces. These are returned under the mower back into the soil to serve as natural fertilizer.

$273.89 USD

Fixed Weight Kit (Part # 110-2085)

$277.19 USD

Midsize Chute Gate Kit (Part # 115-4190)

$472.99 USD

Genuine OEM Part

$472.99 USD

OIL - SYNTHETIC, ALL SEASON (Part # 117-0066)

Oil Filter (Part # 119-5852)

$26.60 USD

Your Toro engine’s oil filter removes waste, captures harmful debris, dirt, and metal fragments in your motor oil to keep the engine running smoothly. Without the oil filter, harmful particles can get into your motor oil and damage the engine. Installing genuine Toro engine oil filters on a regular service intervals keeps your Toro equipment running at its best!

$26.60 USD

Air Filter Element - Primary (Part # 120-7447)

$9.80 USD

Having a properly functioning air filter is an engine’s first line of defense against the dirt and debris that is kicked up during the operation. When the air filter is in good condition and working properly, it prevents dirt from entering the engine through the carburetor. Count on Toro genuine OEM air cleaners and air cleaner assemblies to keep your gasoline powered equipment running at peak performance.

$9.80 USD

3 Bushell Soft Collection Bag for GrandStand Mowers (Part # 30104)

$622.59 USD

3 Bushell Soft Collection Bag for GrandStand Mowers. To best protect your investment and maintain optimal performance of your equipment, count on Toro genuine parts and accessories.

$622.59 USD

Tru-Trak Sulky - Mid Size Fixed Deck Models (Part # 30109)

$1,888.69 USD

Genuine OEM Part

$1,888.69 USD

SAE 30 4-Cycle Lawn Mower Engine Oil 32 oz (Part # 38903)

$9.79 USD

Toro SAE 30 4-cycle engine oil passed the strictest requirements in thousands of hours of testing in hundreds of engines before you filled your lawn mower. This oil meets or exceeds performance requirements of all OEM engines (Toro, Briggs & Stratton, KOLHER, Honda, and Tecumseh). The use of Toro SAE 30 4-cycle lawn mower oil minimizes molecular shearing for extended life in hot-air-cooled applications vs multi-grades (i.e., 10W-30).

$9.79 USD

Please contact your local dealer

Spark Plug (Part # 92-2153)

$4.58 USD

Replacement part.

$4.58 USD

Parts & Manuals

Select your model year from the options below to view parts & manuals.

39634 Serial #
404325000-999999999
400000000-404324999
316000001-316999999
315000001-315999999
314000001-314999999
313000001-313999999
312000001-312999999
311000001-311999999

36 in. (91 cm) Fixed Deck Gear Drive Pistol Grip (50-State)

Fixed Deck Gear Drive

Overview

Features

Pistol Grip Control System

Exclusive TURBO FORCE Deck

Rubber Discharge Chute

Patented Adjustable Baffle

Smarter Design in a Bullnose Bumper

Rugged Spindle Assembly

Extended Life Drive System

A Flat Crisp Cut With Precision Blades

Horizon360® Business Management Software.

Specifications

Accessories

OIL - SYNTHETIC, ALL SEASON (Part # 117-0066)

Parts & Manuals

Warranty

3-Year

Customer Reviews

Horizon360^® Business Management Software.