Landscape Contractor Help Topics

• The blade control (PTO) is disengaged or turned to the OFF position.
• Parking brake is set.
• The operator of the machine must be sitting in the seat when starting.
• Battery is fully charged.
• All electrical connections are connected and in good condition (not corroded or loose).
• Fuse is not blown.

Click here to visit our Fuel Facts page

Type of Fuel:

Unleaded gasoline with an octane rating of at least 87 ((R+M)/2 rating method) is the recommended fuel grade for all gasoline engines in Toro products. Gasoline with up to 10% ethanol (gasohol) or 15% MTBE (methyl tertiary butyl ether) by volume is acceptable. Only purchase what you expect to use within 30 days, or add stabilizer. Fuel stabilizer is available from most Toro dealers.

Ethanol Fuel: Gasoline with up to 10% ethanol is acceptable to use per engine manufacturers guidelines.

Do not use gasoline containing methanol.

For further information about choosing the correct fuel for your machine:

www.lookbeforeyoupump.com

Fresh Fuel:

Fresh fuel (less than 30 days old). Gasoline starts deteriorating over time and fresh fuel ignites more easily. Old gas can leave harmful deposits in your products fuel system.

Today's gasoline does not have the same chemical makeup as years ago. Testing has shown that significant deterioration can begin in as little as 30 days. The first sign of old gas is it makes starting more difficult. This is because the most volatile components of the fuel are the first to deteriorate and are the ones that help an engine start easily.

Fuel Stabilizer:

Fuel stabilizer is designed to help keep the fuel fresher longer. It has to be added the day the fuel is purchased otherwise it will not do the job. It will not make old fuel fresh again. (Please follow the manufacturer’s instructions of the Stabilizer for the amount and how to add to the fuel)

For information regarding Toro Premium Fuel Treatment, click here:

To purchase one 4oz bottle of “Toro Premium Stabilizer”, order part number 117-0089, please visit www.torodealer.com or an authorized Toro dealer.

Fuel Containers:

Use a new or clean fuel container when obtaining new fuel. Toro No Spill Gas Cans are available on our online store at www.torodealer.com or through an authorized Toro dealer.

To download a free operator’s manual, click here. You will need the model and serial number of your machine to download the appropriate manual.

Where do I find the model and serial number? Click on the gray “?” circle under the “Parts & Manual” Heading in the “Customer Support” Tab. 

• Fuel tank is full.
• Air filter is clean.
• Fuel filter is clean.
• Fuel being used was purchased within the last 30 days. (Verify that there is no dirt, water or stale fuel in the fuel tank.)

• If you are currently using high lift blades, try switching to low or medium blades.
• Check to make sure the baffle is adjusted properly in the "A" position.
• Reduce your ground speed.   
• Check deck pitch from front to back.

• The bagger screen may be dirty.   Make sure it is clean and free of any debris. 
• Ground speed may be too fast.
• Conditions may be too wet.  For best results wait until the grass is dry before bagging.
• Verify that the bagger is securely in place.
• Verify bagger belt tension is adjusted properly.

• Fuel tank is full. 
• Fuel shut off valve is in the open position. 
• Throttle lever is in the choke position. 
• Air filter is clean.
• Spark plug is in good condition and securely connected. 
• Fuel filter is clean. 
• Fresh fuel. (Dirt, water or stale fuel in the fuel system can cause the unit not to start).

If you need additional assistance, please contact your local Toro Authorized Service Dealer.

• Make sure the blade is sharp (for best results, replace or sharpen yearly or when needed).
• Operate the machine at full throttle.
• Cut only 1/3 of the grass blade at a time.
• Mow only dry grass or leaves.
• Verify using correct blade for type of mowing (i.e. recycler blades for recycling , High Sail blade for side discharge.) 

If the finished lawn appearance still is unsatisfactory, try one or more of the following:

• Slow down the ground speed of the unit.
• Raise the cutting height on your mower deck.
• Cut the grass more frequently.
• Overlap the cutting swaths instead of cutting a full swath with each pass.
• Alternate mowing direction to keep the grass standing straight - this helps disperse clippings, which enhances decomposition and fertilization.
• Clean the clippings and dirt from the underside of the mower deck after each use. (Grass build up inside the mower will affect cutting quality.)
• Verify correct belt tension to the cutting deck.

To request or download a replacement Owner's Manual or Parts Manual, click here.  To ensure you get the correct manual for your machine you will need the model and serial number of your machine. 

• Fuel tank is full. 
• Fuel shut off valve is in the open position. 
• Throttle lever is in the choke position. 
• Air filter is clean.
• Spark plug is in good condition and securely connected. 
• Fuel filter is clean. 
• Fresh fuel. (Dirt, water or stale fuel in the fuel system can cause the unit not to start).

If you need additional assistance, please contact your local Toro Authorized Service Dealer

• Make sure the blade is sharp (for best results, replace or sharpen yearly or when needed).
• Operate the machine at full throttle.
• Cut only 1/3 of the grass blade at a time.
• Mow only dry grass or leaves.
• Verify using correct blade for type of mowing (i.e. recycler blades for recycling , High Sail blade for side discharge.) 

If the finished lawn appearance still is unsatisfactory, try one or more of the following:

• Slow down the ground speed of the unit.
• Raise the cutting height on your mower deck.
• Cut the grass more frequently.
• Overlap the cutting swaths instead of cutting a full swath with each pass.
• Alternate mowing direction to keep the grass standing straight - this helps disperse clippings, which enhances decomposition and fertilization.
• Clean the clippings and dirt from the underside of the mower deck after each use. (Grass build up inside the mower will affect cutting quality.)
• Verify correct belt tension to the cutting deck.

The Toro Company promises to repair any Toro consumer product at no charge if there is a defect in materials or workmanship of the unit. The warranty period varies from product to product.

The Toro Company promises to repair any Toro consumer product at no charge if there is a defect in materials or workmanship of the unit. The warranty period varies from product to product. 

Please contact a Toro Authorized Service Dealer in your area or your Operator's Manual for full details. 

For information regarding Toro's industry leading warranty on your product's   warranty coverage, please refer to the last page in your Operator's Manual.