Professional 6000 Series Petrol Z Master® 152 cm 72942TE

MyRide® Suspension System
  • Model: 72942TE
  • Deluxe suspension seat features thick cushions, large bolsters and 3-D isolator mounts that absorb bumps and vibrations to reduce operator fatigue, fully adjustable to match operator comfort.
  • Our TURBO FORCE deck features heat-treated steel blades and our patented adjustable discharge chute, nothing cuts as fast or as well
  • Unitized pump and wheel motor uses proven commercial hydraulic components while eliminating hoses and other potential leak points

Overview

A heavy-duty mower should provide heavy-duty comfort, and the Toro Professional Z Master® 6000 Series Petrol Mower comes through. There’s also a deluxe seat with arm rests, a convenient operator information centre, and a Rollover Protection System. The Kawasaki® FX801V engine delivers plenty of power, and the patented adjustable baffle lets you achieve maximum cutting performance by fine-tuning the deck to meet changing conditions. For durability, the rear discharge 152 cm 7-gauge high-strength TURBO FORCE® steel deck is 75% stronger than ordinary steel decks and delivers an unsurpassed cut.

Features

Cast Aluminum Spindle
Cast Aluminium Spindle
Cools quickly for enhanced durability and performance.
Deluxe Handcrafted Seat with Arm Rests
Deluxe Handcrafted Seat with Arm Rests
Ultimate padding and back support with a handcrafted seat with arm rests and bullhorn logo.
Exclusive TURBO FORCE Deck
Exclusive TURBO FORCE Deck
High-capacity TURBO FORCE decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE decks can be fine-tuned in order to conquer changing turf conditions.
7-Gauge, High-Strength Steel
7-Gauge, High-Strength Steel
The TURBO FORCE deck is constructed of 7-gauge, high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.
A Flat Crisp Cut with Precision Blades
A Flat Crisp Cut with Precision Blades
6.35 mm thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic mulching blades, medium sail Bahai blades, and low sail sand blades.
Rubber Discharge Chute
Rubber Discharge Chute
High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.
Folding Rollover Protection System ROPS
Folding Rollover Protection System ROPS
A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.
Patented Adjustable Baffle
Patented Adjustable Baffle
Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximise discharge velocity.
Smooth, Powerful Response
Smooth, Powerful Response
The new unitised pump and wheel motor use proven commercial hydraulic components while eliminating hoses and other potential leak points. You’ll get a smoother, faster response while enjoying an even more reliable machine.
Smarter design in a bull-nose bumper.
Smarter design in a bull-nose bumper.
7-gauge bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimise blowout of debris and dust. The bottom, leading edge of the deck is raised 6.35 mm, allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf “ploughing” during spring and fall clean-up also is significantly reduced.
Operator Information Center
Operator Information Center
The instrument panel includes a digital hour meter, fuel gauge, and voltage meter, as well as diagnostic indicators for the safety interlock system.

Specifications

Air Filter Heavy-duty canister air cleaner
Blade Tip Speed 5,638 m/min
Carrier Frame 7.6 cm x 3.8 cm x 10 gauge
Caster Tyres 33 cm x 16.5 cm – 15.2 cm Flat-Free Semi-Pneumatic
Cutting Width 152 cm
Deck Design 7-Gauge 152 cm TURBO FORCE® w/bull-nose bumper
Deck Material 7 Gauge Steel
Discharge Chute Rubber
Drive Tyres 61 cm x 30.5 cm – 30.5 cm
Engine 19 kW (25.5 hp) Kawasaki FX801V 852cc @ 3400 rpm*
Engine Brand Kawasaki
Engine Displacement (cc) 852 cc
Engine Horsepower 18.5 kW (25.5 hp)
Engine Power (kW) 19 kW
Forward Ground/Transport Speed Up to 11.5 mph
Front Bumper Reinforced Bull-Nose
Fuel Capacity 45.4 litres
Fuel Type Petrol
Height of Cut 2.5 - 14.0 cm
Hour Meter Standard
Hydraulic Fluid Premium synthetic
Number of Blades 3
Product Type Zero Turn Mowers
Product Use Commercial
Roll-Over Protection (ROPS) Folding; Standard
Seat Handcrafted Deluxe Suspension Seat with Arm Rests
Spindle Bearings Maintenance-free
Spindle Housing 22.9 cm (9") Diameter Cast Aluminium
Start Type Electric
Steering Controls 1⅝" (4.1 cm) Diameter Grips; Adjustable, Dampened
Steering Dampeners Standard Dampers

Accessories

Hitch Kit (Part number 109-9487)
HYPR-OIL 500 -QUART (Part number 114-4713)
HYPR-OIL 500-GALLON (Part number 114-4714)
HYPR-OIL 500-5 GALLON (Part number 114-4715)
BIMINI FOLDING SHADE ASM (Part number 115-4510)
KIT,FRPS LIGHT (Part number 116-1154)
SEAT COVER W/ARM REST - Z MASTERS (Part number 117-0095)
SKID-BUMPER, DECK (Part number 126-0854)
KIT-ROPS LOCK TORO (Part number 126-4064)
Anti-Scalp and Wear Bar Kit, Zero-Turn-Radius Rear-Discharge Riding Mo (Part number 127-6650)
Jack Mount Kit, Zero-Turn-Radius Side-Discharge or Rear-Discharge Ridi (Part number 127-6665)
Jack Kit, Zero-Turn-Radius Side-Discharge or Rear-Discharge Riding Mow (Part number 127-6666)
Worklight Kit (Part number 135-7320)
24X12N12 - TWEEL TURF (Part number 139-7891)
BLADE-20.50 ATOMIC (Part number 140-1241)
BLADE-20.50 CR LOW FLOW (Part number 140-1244)
6 PACK-BLADE, 20.5 ATOMIC (Part number 140-4880)
WEIGHT KIT, UNDER TOE BOARD (Part number 140-4958)
TORO RIDER OVER SEAT BAG (Part number 490-7317)
Toro Deluxe Z Cover (Part number 490-7319)
TORO RIDER ARM REST BAG (Part number 490-7320)
Spark Arrestor Screen (Part number 75-6880)
Filter Minder Gauge (Part number 99-4664)
KIT, TRASH HOLDER (Part number TC26)

Parts & Manuals

Select your model year from the options below to view parts & manuals.