Sand Pro® 2040Z

  • Model: 08706
See All Items in Sand Pro® Series
Request a Demo
  • The zero-turn steering design allows easy grooming that other machines cannot access. Ultimately reducing grooming time with its power steering via two independent control sticks.
  • This unique 84-inch (213 cm) wide flex tooth rake features three reversible rubber trowels that reduce damage to bunker liners and edges. Each of the rake's three sections moves independently to follow bunker contours. The flex tooth rake has adjustment stops for pivot, rake pitch and "lift in turn" height.
  • The Sand Pro 2040Z transports at 12 mph (19.3 km/h), 20% faster than other Sand Pro models.
  • The rear attachment is easily operated through a thumb switch on the right hand control stick. The hydraulic lift system is safe and quick, allowing the operator to enter and exit bunkers quickly.
  • The unitized transmission design consists of two independent unitized pump and wheel motor assemblies that minimize hydraulic lines and connections for reliable, low-maintenance performance.
  • This patented feature makes the inside flex tooth rake section lift in a tight turn preventing teardrop formation, leaving a uniform surface.
  • The Sand Pro 2040Z's twin cylinder, air-cooled Kawasaki® 12.2 hp (9.1 kW) gasoline engine is powerful enough to easily climb over tough terrain and quickly transport over hills without bogging down. The single-stage cyclonic air filter keeps the engine running cleanly in the dustiest conditions.

Overview

The Sand Pro® 2040Z mechanical rake is unlike anything else in the marketplace; a zero-turn mechanical groomer delivering unmatched maneuverability and productivity. This unique machine is a daily bunker rake that will reduce labor costs for both mechanical and hand raking of bunkers and infields. A brand new "flex" raking system with the patented "lift in turn" feature enables an operator to turn tightly in bunkers without leaving unraked teardrops or tire marks.

Features

Unparalleled Maneuverability & Productivity
Unparalleled Maneuverability & Productivity
The zero-turn steering design allows easy grooming that other machines cannot access. Ultimately reducing grooming time with its power steering via two independent control sticks.
Innovative Bunker Raking System
Innovative Bunker Raking System
This unique 84-inch (213 cm) wide flex tooth rake features three reversible rubber trowels that reduce damage to bunker liners and edges. Each of the rake's three sections moves independently to follow bunker contours. The flex tooth rake has adjustment stops for pivot, rake pitch and "lift in turn" height.
Fast Transport
Fast Transport
The Sand Pro 2040Z transports at 12 mph (19.3 km/h), 20% faster than other Sand Pro models.
Thumb-Activated Groomer
Thumb-Activated Groomer
The rear attachment is easily operated through a thumb switch on the right hand control stick. The hydraulic lift system is safe and quick, allowing the operator to enter and exit bunkers quickly.
Easy Access for Maintenance
Easy Access for Maintenance
The unitized transmission design consists of two independent unitized pump and wheel motor assemblies that minimize hydraulic lines and connections for reliable, low-maintenance performance.
"Lift In Turn"
This patented feature makes the inside flex tooth rake section lift in a tight turn preventing teardrop formation, leaving a uniform surface.
Reliable Engine
Reliable Engine
The Sand Pro 2040Z's twin cylinder, air-cooled Kawasaki® 12.2 hp (9.1 kW) gasoline engine is powerful enough to easily climb over tough terrain and quickly transport over hills without bogging down. The single-stage cyclonic air filter keeps the engine running cleanly in the dustiest conditions.

Specifications

Air Filter Heavy-duty single stage cyclonic air filter with replaceable element
Alternator 20 amps
Battery 12V
Brakes - Rear Hydrostatic
Cab Unit No
Controls Ignition: Off/Run/Start; Throttle: Low - High Idle; Choke: Opens/Closes choke plate; Parking Brake: Off - On
Cooling System Air Cooled
Displacement 603cc (36.7 ci)
Frame Rectangular structured steel tube and high strength steel plate welded construction. Four tie down loops, one located on each corner of the machine.
Fuel / Power Source Gasoline
Fuel Capacity 4.5 gallon (17 liter)
Gauges/Instrumentation Hour meter, Low Battery LED will illuminate if key voltage is less than 12.3V in run position
Ground Clearance 5.5" (14 cm) at machine centerline using 24" (61 cm) tires
Ground Speed - Forward 0 - 12 mph (0 - 19.3 km/h)
Ground Speed - Reverse 0 - 4 mph (0 - 6.4 km/h)
Height 73" (185 cm)
Hydraulic Oil Factory fill Mobil fluid 424 tractor transmission fluid; Left hand transmission section: 3.36 qt. (3.18 liters); Right hand transmission section: 3.99 qt. (3.77 liters).
Inside Turning Radius 0" (0 cm)
Interlock Safety interlocks for operator presence, neutral and parking brake
Length 84.8" - 89" (215 - 226 cm) with rear attachment
Oil Capacity with Filter 1.7 quarts
Optional Accessories Light Kit, Speed Limiter Kit, Transport Speed Limiter Kit, Seat Suspension Kit, Mesh Bag Kit, Turf Trac Tire, Bimini Sunshade, Rake Holder Rear Attachments: Flex Tooth Rake, Broom Finishing Kit, Nail Drag, Drag Mat Finishing Kit
Overall Width 71.5" - 84" (182 - 213 cm) with rear attachment
Power Rating 13.6 hp (10.1 kW)
Power Steering Yes
Power Train (Engine Description) Kawasaki® 2-cylinder, air-cooled, gas engine; Gross HP 13.6 HP (10.1 kW), Governed HP 12.2 HP (9.1 kW) @ 2400 rpm; Max torque 27.3 ft-lbs (37.0 Nm) @1800 rpm; Displacement 36.7 cu-in. (603 cc); Oil Filter External, spin-on.
Rear Attachment Hydraulic Lift Standard
Roll-Over Protection (ROPS) Standard
Sound Level 88 dBA at operator ear
Steering System Description Controlled through two independent control sticks with integrated dampeners. Min. turning radius: 0" (0 cm).
Tires - Front 16" x 7.5" - 8", 4-ply, Turf Tire
Tires - Rear 25" x 12" - 9", 3-ply, Knobby Tread (Turf Tamer)
Traction Drive Belt driven independent infinitely variable unitized transmission, with automatic tensioning system
Vehicle Configuration Standard
Weight 920 - 970 lbs. (417 - 439 kg) with rear attachment
Wheelbase 58" (147 cm)

Documents

Title Documents
SandPro_2040Z_Sell_Sheet-1-29-2020.pdf PDF - Sellsheet-en-CA
Sand-Pro-Brochure-7-19-2019.pdf PDF - Brochure-en-CA