|
|
 |
TimeCutter® Z5030
The TimeCutter® Z5030 features a powerful twin cylinder 23hp KOHLER® Courage engine** and 50" deck allowing you to mow significantly larger amounts of grass in one pass than the 42" zero turn mower.
 |
|
|
 |
Product Details
|
MSRP: $3,199 USD
-
50" Mowing Deck
-
23 hp** KOHLER Courage Engine
-
Dual Hydrostatic Drives
-
Smooth Front Tires
-
3-Year Limited Warranty**
|
|
|
 |
|
| |
- Features
- Attachments
- Specifications
23 hp** KOHLER® Courage Twin Cylinder Engine

|
23 hp** KOHLER® Courage Twin Cylinder Engine
Kohler engines are manufactured to withstand the rigors of commercial use so you can be confident the quality and durability of your Kohler Courage engine will be more than enough to tackle almost any job in your backyard. Twin cylinder Kohler Courage engines have high horsepower and greater displacement for easier starts, reduced noise and less vibration. Plus, twin-cylinder engines burn cleaner and have increased fuel efficiency if maintained properly.
|
50" Mowing Deck

|
50" Mowing Deck
Toro's four inch deep, top discharge deck design provides superior cutting performance in all conditions. Anti-scalp wheels allow the deck to float over the turf and reduce scalping. Create your own natural fertilizer by adding a Recycler® kit or make yard clean-up a snap with an optional Twin Bagging system.
|
Smooth Front Tires

|
Smooth Front Tires
Professional landscape contractors know that smooth tires reduce turf wear and improve manuverability. All 50" TimeCutter models come standard with 11" x 4" smooth front tires. Available as an option on all other models.
|
Dual Hydrostatic Drive System

|
Dual Hydrostatic Drive System
Independent hydrostatic drive systems provide responsive manueverability and zero turning capabilities. These independent drives are anchored to Toro's unibody frame and strengthened with a 3/4" diameter cross-bar for lasting durability and performance.
|
Heavy Duty Uni-Body Steel Frame

|
Heavy Duty Uni-Body Steel Frame
The unibody steel frame provides the optimal balance in rigidity and flexibilty for quick, highly manueverable mowing conditions. Z5030 shown.
|
Precision Steering System

|
Precision Steering System
Control lever dampeners provide smooth drive engagement to prevent jerky operation and sudden starts and stops. Thick, padded control levels allow you to keep in control and ride in comfort.
|
Cast Iron Rear Bumper

|
Cast Iron Rear Bumper
This rugged, cast iron rear bumper protects the back as you nimbly maneuver around your lawn.
|
3-Gallon Fuel Capacity

|
3-Gallon Fuel Capacity
The TimeCutter features a large 3-gallon fuel tank for more mowing with less fill-ups. Knowing when to fill up is simple thanks to the translucent tank, which also helps to prevent overfilling. The central location of the tank provides a lower and more stable center of gravity for optimum control.
|
7 mph Forward Ground Speed
7 mph Forward Ground Speed
Get the job done fast. With a top speed of 7 mph, the TimeCutter is all about productivity. Whether you want to cut your mowing time or enjoy the ride, the TimeCutter Z has the speed you need.
|
Non-Slip, Easy-to-Clean Floor Pan

|
Non-Slip, Easy-to-Clean Floor Pan
The pierced floor pan is perfect for homeowners who like their mower to look as nice as their lawn. Simply hose down the floor pan after each use and keep your TimeCutter looking as good as new. The non-slip pierced extrusions also provide an additional measure of safety.
|
Washout Ports

|
Washout Ports
Deck washout ports (1 on the 42" and 2 on the 50" decks) provide quick cleaning underneath the deck, maintaining optimum airflow for optimum cutting performance. 50" deck is pictured.
|
3-Year Limited Warranty*

|
3-Year Limited Warranty*
The TimeCutter Z's are warranted against defects in materials and workmanship for three years.
*See retailer for warranty details.
|
Heavy Duty Rear Engine Guard

|
Heavy Duty Rear Engine Guard
This heavy duty steel guard protects the engine from branches and debris as you nimbly maneuver around your lawn.
|
Engine Cover

|
Engine Cover
Provides extra protection for the engine from dirt and debris. The Rear Engine Guard is required for installation on the Z4200 and Z5030.
|
Adjustable Armrests

|
Adjustable Armrests
Provide operator comfort when mowing for extended periods and easily adjust for any operator.
|
Foot Assist Height of Cut System

|
Foot Assist Height of Cut System
Allows you to quickly and easily raise the mowing deck while mowing to avoid scalping and can also be used to lift the mowing deck while changing height of cut positions.
|
Rubber Floor Mat

|
Rubber Floor Mat
Reduces vibration and dampens deck noise during mowing.
|
Recycler® Kit

|
Recycler® Kit
Add on the Toro Recycler system and create your own natural fertilizer. This patented system cuts grass clippings 6-8 times turning them into a fine nutrient-rich mulch to feed your lawn all season. The secret lies in the unique 'kickers' and baffles that direct clippings back into the blades to be re-cut before being released into your lawn.
|
Twin Bagger

|
Twin Bagger
Pick up lawn clippings, leaves, and debris quickly with our twin bagger.
|
Hourmeter

|
Hourmeter
Keep your TimeCutter Z in peak condition by adding an hourmeter for determining service maintenance.
|
Hitch Kit

|
Hitch Kit
The easy to attach hitch kit allows you to increase the functionality of your Z by allowing you to pull light duty attachments.
|
Cart

|
Cart
Transporting material is easy with this large dump cart.
• 10 cu. ft., 650 lb. load limit
• Heavy-duty poly bed
• Molded in features for accessorizing
• 15" x 4" pneumatic wheels with turf tread design
|
Sunshade

|
Sunshade
Helps you stay cool and comfortable on sunny days.
|
 |
Engine |
23 hp** KOHLER Twin Cylinder OHV |
 |
Engine Construction |
OHV Full Pressure Lubrication with Spin-On Oil Filter Cast Iron Cylinder Liner Dual Element Air Cleaner |
 |
Fuel Capacity |
3 Gallon |
 |
Mowing Deck |
50" 3-blade |
 |
Recycler (Kit) |
Optional |
 |
Height of Cut |
1.5" - 4.5" |
 |
Anti-Scalp Wheels |
3 Standard |
 |
Blade Engagement |
Mag-Stop Electric |
 |
Deck Washout Port |
2 Standard |
 |
Transmission |
Dual Hydrostatic |
 |
Steering |
Dual Wrap Around Levers |
 |
Hydraulic Dampeners |
Standard |
 |
Ground Speed F/R |
7.0 mph/ 3.4 mph |
 |
Tires |
11x4 Smooth Front 18 x 9.5 Rear |
 |
Dimensions - L x H |
73.1" x 40.3" |
 |
Width - Deflector Up / Down |
53.5" / 63.0" |
 |
Seat |
18" Extra Tall, Adjustable |
 |
Cup Holder |
Standard |
 |
Tool Box |
Standard |
 |
Warranty |
3-Year Limited* |
|
| |
 |
| |
|
| |
 |
 |
Return To: TimeCutter® Z
|
 |
*See retailer for details on all warranties.
**The gross horsepower of this engine was laboratory rated by the engine manufacturer in accordance with SAE J1940. As configured to meet safety, emission, and operating requirements, the actual engine horsepower on this class of lawn mower will be significantly lower.
†Manufacturer Suggested Promotional Price for a limited time. MSRP = Manufacturers Suggested Retail Price.
Price listed applies only to US market
This product may only be available in the United States.
Please check your local distributor for product availability.
|
 |
|
|